Uniden SR30C English Owner Manual - Page 26
LCD Message, Batt°, Meaning, Scanner, Cond°
View all Uniden SR30C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
3. Connect the other end of the USB cable to the computer's USB port or to an AC or DC adapter that provides USB charging power. Note: If you connect to a computer's USB port, the PC will prompt you for the drivers for your scanner. To download and install these drivers, go to http://info.uniden.com/UnidenMan4/ SR30C. 4. The scanner displays CHArg and the low battery icon while it charges the batteries. The screen goes blank after the scanner is completely charged. Different status messages may display, depending on the battery type and scanner status: LCD Message CHArg None Batt. Type Ni-MH Ni-MH Meaning Scanner is charging. Unit is charged. Scanner Cond. Off Off None Ni-MH Scanner is not Off charging (Battery selection switch is set to Alk.) Err CHArg Ni-MH Batteries cannot Off be charged (dead battery). ILEgAL Ni-MH USB external power Off is out of range. If the batteries are good, the scanner charges the batteries. and it operates normally. If the scanner cannot immediately 26