Uniden UDW10055 English Owner's Manual - Page 15
Changing to a Different Camera
View all Uniden UDW10055 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Changing to a Different Camera ►► On the receiver, press to cycle through the enabled channels from CAM1 through CAM4. After the last enabled channel, the receiver goes back to the first camera. 1 2 3 4 ►► Each time you press , the receiver goes to the next enabled channel, regardless of whether there is a camera present on that channel. If there is no camera signal on a particular channel, the receiver shows a black screen with the message No Signal. 1 2 3 4 NO SIGNAL ►► You should only turn a channel On if you have a camera paired to that channel. ►► The receiver skips any channels that are set to Off in the menu. 1 2 3 4 (Channel CAM2 set to Off.) 15
15
Changing to a Different Camera
►
On the receiver, press
to cycle through the enabled channels from
CAM1
through
CAM4
. After
the last enabled channel, the receiver goes back to the first camera.
►
Each time you press
, the receiver goes to the next enabled channel, regardless of whether
there is a camera present on that channel. If there is no camera signal on a particular channel,
the receiver shows a black screen with the message
No Signal
.
►
You should only turn a channel
On
if you have a camera paired to that channel.
►
The receiver skips any channels that are set to
Off
in the menu.
4
3
2
1
NO SIGNAL
4
3
2
1
4
3
2
1
(Channel
CAM2
set to
Off
.)