Uniden XC810 English Owners Manual - Page 5

Installation

Get Uniden XC810 PDF manuals and user guides View all Uniden XC810 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 5 highlights

Installation Selecting a Location Before choosing a location for your new phone, read the "Installation Considerations" included in the "Precautions and Important Safety Instructions" brochure. Applying Power to the Base All the XC800 Series phones require the included AC adapter and an AC outlet that is not controlled by a wall switch. To relieve strain on the DC plug when the phone is placed on a desk or table, connect the adapter as shown below. Wrap the power cord around the convenient notch on the bottom. Important: Place the power cord so that it does not create a trip hazard, or where it could become chafed and create a fire or other electrical hazards. Wall Installation Standard Wall Plate Mounting These phones are designed to be mounted on a standard AT&T or GTE wall plate. 1. Plug the AC adapter into the base. 2. Place the AC adapter cord inside the molded channel. Desk or Tabletop Installation 1. Place the base on a desk or tabletop. 2. Plug the AC adapter cord into the 9V DC input jack on the base. 3. Plug one end of the short telephone cord into the TEL LINE jack on the base. 3. Place the AC adapter cord around the strain relief. 4. Plug one end of the long telephone cord into the TEL LINE jack on the base. 5. Plug the other end of the cord into the wall telephone jack. 6. Plug the AC adapter into a standard 120 VAC wall outlet. Note: Do not use an outlet controlled by a wall switch. 4. Place the telephone cord inside the molded channel on the bottom of the base. Then plug the other end of the telephone cord into the modular jack on the wall. 5. Place the base on the posts of the wall plate and push down until it's firmly seated. 6. Plug the AC adapter into a standard 120 VAC wall outlet. Note: Do not use an outlet controlled by a wall switch. Use only the Uniden AC adapter supplied with this phone. Direct Wall Mounting If you do not have a standard wall plate, you can mount your phone directly on a wall. Before mounting your phone, consider the following: 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
Installation
Selecting a Location
Before choosing a location for your new phone,
read the “Installation Considerations” included in
the “Precautions and Important Safety
Instructions” brochure.
Applying Power to the Base
All the
XC800 Series
phones require the included
AC adapter and an AC outlet that is not controlled
by a wall switch. To relieve strain on the DC plug
when the phone is placed on a desk or table,
connect the adapter as shown below.
Wrap the power cord
around the convenient
notch on the bottom.
Important:
Place the
power cord so that it
does not create a trip
hazard, or where it could become chafed and
create a fire or other electrical hazards.
Desk or Tabletop Installation
1. Place the base on a desk or tabletop.
2. Plug the AC
adapter cord into
the 9V DC input
jack on the base.
3. Place the AC adapter
cord around the
strain relief.
4. Plug one end of
the long
telephone cord
into the
TEL LINE
jack on the base.
5. Plug the other end of
the cord into the wall
telephone jack.
6. Plug the AC adapter into a standard 120 VAC
wall outlet.
Note:
Do not use an outlet controlled by a wall switch
.
Wall Installation
Standard Wall Plate Mounting
These phones are designed to be mounted on a
standard AT&T or GTE wall plate.
1. Plug the AC adapter into
the base.
2. Place the AC adapter cord
inside the molded channel.
3. Plug one end of the short
telephone cord into the
TEL LINE
jack on the base.
4. Place the
telephone cord
inside the molded
channel on the
bottom of
the base.
Then plug the
other end of the
telephone cord
into the modular
jack on the wall.
5. Place the base on the posts of the wall plate
and push down until it’s firmly seated.
6. Plug the AC adapter into a standard 120 VAC
wall outlet.
Note:
Do not use an outlet controlled by a wall switch.
Direct Wall Mounting
If you do not have a standard wall plate, you can
mount your phone directly on a wall. Before
mounting your phone, consider the following:
5
Use only the Uniden AC adapter supplied
with this phone.