ViewSonic E771 User Guide - Page 7

Quick Installation 1 Connect video cable Make sure both the monitor and computer are powered OFF • Connect the video cable to the computer, then to the monitor. 4 For best image quality: Set your graphic card's timing (resolution and refresh rate) to 1024x768@ 75Hz. Macintosh® users: Connect a Macintosh adapter to the video cable, then to the computer. To Installation is complete! E N G L order a ViewSonic° Macintosh adapter, contact ViewSonic (see the back cover of this guide). You will need to provide your monitor's serial number. Enjoy your new monitor! To be best prepared for any future customer service needs, write the serial number (see back of this guide.) S H 2 Connect power cord Connect the power cord to a properly grounded AC outlet. 3 Power-ON computer and monitor Power-ON the computer, then Power-ON the monitor. NOTE: At this point Windows® 98 users may receive a message asking them to install the monitor's INF file. Insert the enclosed CD-ROM, wait for it to auto-load, select "Monitor Drivers" and follow the onscreen instructions. ®d Vi&wSonic I I Wall socket Power cord 6 Getting Started Video cable ViewSonic E771