ViewSonic LS550WH - 3000 Lumens WXGA Short Throw LED Projector w/ 125% Rec. 709 - Page 58
LAN Control Settings, Light Source Settings, Reset Settings, Zoom, Keystone, Language
View all ViewSonic LS550WH - 3000 Lumens WXGA Short Throw LED Projector w/ 125% Rec. 709 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Menu Option LAN Control Settings Description LAN Settings ͫ DHCP ON: Select this if you are in a DHCP environment and Projector IP Address, Subnet Mask, Default Gateway, DNS Server settings will be automatically retrieved. ͫ Static IP: Select this if you are in a non-DHCP environment and make adjustments to below settings. Projector IP Address Subnet Mask Default Gateway DNS Server Only available when LAN Settings is set to Static IP. Use / to select a column and use / to adjust the value. Standby LAN Control Allows the projector to provide the network function in standby mode. Apply Enacts the settings. Light Source Settings Light Source Mode ͫ Normal: Provides full light source brightness. ͫ Eco: Reduces light source power consumption by 20% and lowers brightness to extend the light source life and decreases the fan noise. ͫ Dynamic Black 1: Reduces light source power consumption by up to 70% depending on the content brightness level. ͫ Dynamic Black 2: Reduces light source power consumption by up to 50% depending on the content brightness level. Reset Light Source Hours Resets the light source timer after a new light source is installed. For changing the light source, please contact qualified service personnel. Light Source Hours Information ͫ Light Source Usage Time: Displays the number of hours the light source has been used. Reset Settings Returns all settings to the factory preset values. When using Reset Settings, the following settings will still remain: Zoom, Keystone, Language, Projector Position, USB A Power, High Altitude Mode, Security Settings, Remote Control Code, Control Method, and Baud Rate. 58