ViewSonic LS625W User Guide - Page 25
Connecting to composite video source devices, Audio playback with the projector, Video source device.
View all ViewSonic LS625W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Connecting to composite video source devices Examine your Video source device to determine if an unused composite output jack is available: • If so, you can continue with this procedure. • If not, you will need to reassess which method to use to connect to the device. 1. Take a Video cable and connect one end to the composite Video output socket of the Video source device. 2. Connect the other end of the video cable to the VIDEO socket on the projector. If the selected video image is not displayed after the projector is turned on and the correct video source has been selected, check that the Video source device is turned on and operating correctly. You must also check that the signal cables have been connected correctly. When the component video is not available, use the composite video connection method to connect to this device. See "Connecting to Video source devices" for details. Audio playback with the projector You can use the speaker of the projector in the presentation or connect other individual speaker to the AUDIO OUT jack of the projector. 18