ViewSonic LS831WU - 4500 Lumens WUXGA Ultra Short Throw Laser Projector with HV - Page 43
LAN Control Settings, allows you to manage the projector, configure the LAN control
View all ViewSonic LS831WU - 4500 Lumens WUXGA Ultra Short Throw Laser Projector with HV Keystone and 4 Corner Adjustment manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
i. These buttons function the same as the ones on the OSD menus or remote control. ii. To switch between input signals, click on your desired signal. NOTE: • The source list varies according to the connections available on the projector. • When you use the projector control panel or remote control to change the OSD menu settings, it may take a while for the web browser to synchronize these changes with the projector. 2. The Tools page allows you to manage the projector, configure the LAN control settings and secure access to remote network operations on this projector. i ii iv iii v vi i. This section is only used with the Crestron Control System. Please contact Creston or refer to its user manual for setup information. ii. You can name the projector, keep track of its location and the person in charge of it. iii. You can adjust the LAN Control Settings. iv. Once set, access to the remote network operation on this projector will be password-protected. v. Once set, access to the tools page will be password-protected. NOTE: • To prevent errors, only input the English alphabet and digits on the Tools page. • After making the adjustments, press the "Send" button and the data will be saved for the projector. 43