ViewSonic PG700WU User Guide - Page 58
D Settings
View all ViewSonic PG700WU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
4. BASIC menu Function Description Audio Settings See "Adjusting the sound" on page 44 for details. Presentation Timer See "Setting the presentation timer" on page 34 for details. Pattern Blank Timer The projector can display several test patterns. It helps you adjust the image size and focus and check that the projected image is free from distortion. See "Hiding the image" on page 35 for details. Message Selecting On displays the current information on the screen when the projector is detecting or searching for a signal. Splash Screen Allows you to select which logo screen will be displayed during projector start-up. 3D Settings HDMI Settings LAN Control Settings (PG705HD/ PG705WU) Lamp Settings Filter Settings DCR See "Using the 3D functions" on page 36 for details. See "Changing HDMI input settings" on page 27 for details. See "Controlling the projector through a LAN environment (PG705HD/PG705WU)" on page 37 for details. Lamp Mode See "Setting Lamp Mode" on page 58 for details. Reset Lamp Hours Resets the lamp timer after new lamp is installed. For changing the lamp, please contact qualified service personnel. Lamp Hours See "Getting to know the lamp hour" on page 58 for details on how the total lamp hour is calculated. See "Using the dust filter" on page 56 for details. Enables or disables the DCR (Dynamic Contrast Ratio) function. Selecting On enables the function and the projector will automatically switch the lamp mode according to the input image detected. This function is only available for PC timings from a VGA or HDMI input signal. After enabling DCR, frequent lamp mode switching may shorten lamp life and noise level will vary during operation. 5. ADVANCED menu 53