ViewSonic PG700WU Lamp Swapping Instruction - Page 3

7. Use the handle to slowly pull the lamp out of the projector. CAUTION yy Pulling it too quickly may cause the lamp to break and scatter broken glass in the projector. yy Do not place the lamp in locations where water might splash on it, children can reach it, or near flammable materials. yy Do not insert your hands into the projector after the lamp is removed. If you touch the optical components inside, it could cause color unevenness and distortion of the projected images. 8. As show in the figure, insert the new lamp. Align the lamp using the alignment holes and gently push the lamp into the locked position CAUTION yy Do not touch glass of lamp with bare hands. Oils from the skin can create a hot spot on the lamp and may result with damage to the lamp. 9. Insert the lamp connector and tighten the screw that secures the lamp. CAUTION yy Loosen screw may cause a bad connection, which could 9-1 result in malfunction. yy Do not over tighten the screw. 10.Replace the projector's mylar and lamp cover. 9-3 9-23 2