ViewSonic PJ1000 Service Manual - Page 24
projector.
UPC - 766907204018
View all ViewSonic PJ1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
7. Dust cleaning (1) Check dust condition 1. Show the white picture on the screen (whose size is 60") to check dust condition. 2. If dust condition is not good, should be clean the LCD module ass'y and the Air filter. (2) Clean the LCD module ass'y 1. Remove the LCD module ass'y. (Refer Item 6 - 2 2. Blow the air on both side of the LCD module by dust blower or air gun. 3. If dusts are still on, wipe it with the special glass cleaning cloth. 4. Fix the LCD module, and check dust condition. 5. If it is OK, adjust convergence. (see 4 - 3) (3) Clean the air filter 1. Remove the air filter from the bottom of the projector. (see Fig.7 - 1) 2. Wipe the air filter with a cloth moistend with water or neutral detergent, and wipe with a dry cloth. (1) Remove 1 screws. iv • L (2) Remove the air filter. • • • • • Fig.7 - 1 ViewSonic Corporation - 21 - Confidential - Do Not Copy PJ1000