ViewSonic PJ500-2 User Guide - Page 14
Table 3: Basic Operation, Continued, Description
View all ViewSonic PJ500-2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Item AUTO (remote control) BLANK ON/OFF (remote control) MENU (*) (projector control panel and remote control) SEARCH (remote control) ASPECT (Aspect Ratio) (remote control) ESC (Escape) (remote control) ENTER (remote control) Table 3: Basic Operation (Continued) Description Automatic Adjustment (for RGB input): Press the AUTO button. Horizontal Position (H. POSITION), Vertical Position, (V. POSITION), Clock Phase (H. PHASE), and Horizontal Size (H. SIZE), are automatically adjusted. • Before using the AUTO feature, be sure to maximize the window of the application displayed on-screen. Automatic Adjustment (for Video Input): Press the AUTO button. A signal type appropriate for the input signal is selected automatically. This is valid only when AUTO is set for VIDEO on the menu. • This operation requires approximately ten seconds. It may not function correctly with some input signals. Set/ Clear Blank Mode: press the BLANK button. A blank screen (no image) is displayed in this mode. Access the on-screen menu to set the screen color for blank mode. Display/Clear Menu: Press the MENU button. Select Menu: Press the / buttons to select the menu (MAIN, PICTURE-1, PICTURE-2, INPUT, SCREEN, OPTION), and press the control) to proceed. button or the ENTER button (on the remote Select Item: Press the / buttons to select the item you want to operate, and press the button or the ENTER button (on the remote control) to proceed. Select Menu Type (for adjustment with numerical value): After fixing the item, press the button or ENTER button (on the remote control) to turn to the single type menu. To return to the usual menu, press the button or ESC button. Operate: Press the / buttons according to the menu. • The menu display is terminated automatically after approximately 10 seconds of inactivity. Search Signal: Press the SEARCH button on the remote control to search for other signal inputs with following command : When a signal is detected, the projector displays the detected signal picture. If no signal is detected, it turns back to the initial signal input. Example : If S-VIDEO was the last input used before powering off, then S-VIDEO will be the selected input when the projector is powered back on. RGB J VIDEO J S-VIDEO J COMPONENT VIDEO J(RGB) Select Aspect (Ratio): Press the ASPECT button on the remote control to select the aspect ratio. For RGB Input or Hi-Vision 1125i/750p of COMPONENT VIDEO Input: 4:3 Q 16:9 For VIDEO Input, S-VIDEO Input or 525i/525p/625i/625p of COMPONENT VIDEO Input: 4:3 J16:9 JSMALL J(4:3) Escape: Press the ESC button on the remote control to return to the previous menu from a selected sub-menu. Escape: Press the ENTER button on the remote control activate the adjustment screen for a selected menu option. NOTE: Pressing the button performs the same function. 11 ViewSonic PJ500/PJ550/PJ501/PJ551