ViewSonic PJ506ED User Manual
ViewSonic PJ506ED Manual
 |
View all ViewSonic PJ506ED manuals
Add to My Manuals
Save this manual to your list of manuals |
ViewSonic PJ506ED manual content summary:
- ViewSonic PJ506ED | User Manual - Page 1
ViewSonic® PJ506ED DLP Projector - User Guide - Guide de l'utilisateur - Bedienungsanleitung - Guía del usuario - Guida dell'utente - Guia do usuário - Användarhandbok - Käyttöopas - Py Model No. : VS11452 - ViewSonic PJ506ED | User Manual - Page 2
radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference waste, but use the return and collection systems according to local law. ViewSonic PJ506ED - ViewSonic PJ506ED | User Manual - Page 3
guide for further instructions. 7. Do not block any ventilation openings. Install the equipment in accordance with the manufacturer's instructions consult an electrician for replacement of the outlet. efer all servicing to qualified service personnel. Service is required when ViewSonic ii PJ506ED - ViewSonic PJ506ED | User Manual - Page 4
below: Examples of exempted components are: 1. Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other lamps not specifically mentioned in the Annex of RoHS Directive. 2. Lead in by weight and as a cooper alloy containing up to 4% lead by weight. ViewSonic iii PJ506ED - ViewSonic PJ506ED | User Manual - Page 5
the registration form, which you may mail or fax to ViewSonic. For Your Records Product Name: Model Number: Document Number: Serial Number: Purchase Date: PJ506ED ViewSonic DLP Projector VS11452 PJ506ED-1_UG_ENG Rev. 1A 03-12-07 The lamp in this product contains mercury. Please dispose of in - ViewSonic PJ506ED | User Manual - Page 6
any covers on the projector except the lamp cover. Dangerous electrical voltages inside the projector can cause severe injury. Except as specifically directed in this User's Manual, do not attempt to service this product yourself. Refer all servicing to qualified service personnel. 11. Unplug the - ViewSonic PJ506ED | User Manual - Page 7
internal heat buildup may occur, causing picture degradation or damage to the projector. 15. When you replace the projector lamp, never touch the new bulb with your bare hands. The invisible residue left by the oil on as this can result in a risk of fire or electric shock. ViewSonic PJ506ED - ViewSonic PJ506ED | User Manual - Page 8
must be used. If supplied AC Power Cord does not match your AC outlet, contact your sales dealer. This projector is equipped with a grounding type AC line plug. Make sure that your outlet fits the plug plug to prevent from signal interference due to voltage fluctuation. Ground ViewSonic PJ506ED - ViewSonic PJ506ED | User Manual - Page 9
23 Advanced (Computer / Video Mode 23 Audio (Computer / Video Mode 23 Maintenance...24 Cleaning the Lens 24 Cleaning the Projector Housing 24 Replacing the Lamp 25 Specifications...27 Appendix...28 LED Indicator Messages 28 Compatibility Modes 29 Troubleshooting 30 ViewSonic PJ506ED - ViewSonic PJ506ED | User Manual - Page 10
with Macintosh® computers Compatibility with NTSC, PAL, SECAM, and HDTV Multi-function remote control D-Sub 15-pin terminal for analog video connectivity User-friendly, multi-language on-screen display (OSD) Advanced electronic keystone correction * means compressed. ViewSonic PJ506ED - ViewSonic PJ506ED | User Manual - Page 11
Composite Video Cable Audio Cable Remote Control (IR) with Lithium battery Optional Accessory: Projector Carrying Case User's Manual Quick Start Guide VGA (D-SUB) to HDTV is loaded in the remote control. Remove the transparent insulation tape by pulling it before use. ViewSonic PJ506ED - ViewSonic PJ506ED | User Manual - Page 12
Projector Overview Front View 9 87 1 2 3 4 5 6 1 1 Ventilation holes 2 Projection lens 3 Front IR remote control sensor 4 Lens cap 5 Elevator foot 6 Elevator button 7 Zoom ring 8 Focus ring 9 Control panel ViewSonic PJ506ED - ViewSonic PJ506ED | User Manual - Page 13
1 Rear IR remote control sensor 2 Ventilation holes 3 Connection ports 4 Elevator button 5 Elevator foot 1 2 3 2 6 Speaker 7 AC power socket 8 Kensington lock Bottom View 1 Lamp cover 2 Ceiling mount 87 6 2 2 54 2 1 This projector can be used with a ceiling mount for support. The - ViewSonic PJ506ED | User Manual - Page 14
Using the Product Control Panel LED 1 Lamp LED indicator 1 2 Refer to "LED Indicator Messages". 2 Power LED indicator 3 Refer to "LED Indicator Messages". 8 4 7 5 6 Button Function 3 Power Turns the projector on or off. 4 Keystone / Adjusts image distortion caused by tilting the - ViewSonic PJ506ED | User Manual - Page 15
Ports 1 2 3 4 56 7 1 SERIAL When operating the projector via a computer, connect this to the controlling computer's RS-232C port. 2 USB (COMPUTER) ���T��h�is��c�o�n�n�e��c�to equipment to this jack. 7 AUDIO IN Connects an audio output from video equipment to this jack. ViewSonic 10 PJ506ED - ViewSonic PJ506ED | User Manual - Page 16
Remote Control 1. Power Turns the projector on or off. 2. Four directional buttons Use four directional buttons to select items or make adjustments to your selection. 3. MENU Displays or exits the on-screen display menus. 4. Laser Aim the remote projector Manually when the projector is connected - ViewSonic PJ506ED | User Manual - Page 17
from remote control when not using for extended periods. Do not dispose of the used battery along with household waste. Dispose of used batteries according to local regulations. Danger of explosion may happen if batteries are incorrectly replaced. Replce all the batteries with new ones. ViewSonic - ViewSonic PJ506ED | User Manual - Page 18
where the remote sensor is visible. Do not drop the remote control or jolt it. Keep the remote control out of locations with excessively high temperature or humidity. Do not get water on the remote control or place wet objects on it. Do not disassemble the remote control. ViewSonic 13 PJ506ED - ViewSonic PJ506ED | User Manual - Page 19
1 23 3 7 6 5 4 When connecting cable, power cords of both a projector and external equipment should be disconnected from AC outlet. The figure above is a sample projector may differ from the above illustration. The included cables are based on actual shipment delivery. ViewSonic 14 PJ506ED - ViewSonic PJ506ED | User Manual - Page 20
projector. 4. Disconnect the power cord from the electrical outlet and the projector. 5. Do not turn on the projector immediately following a power off procedure. Please wait until the fan motor and the Lamp LED turn off before removing the AC power cord from the projector. ViewSonic 15 PJ506ED - ViewSonic PJ506ED | User Manual - Page 21
lower the image: 1. Press the elevator button. 2. Lower the image, then release the button to lock the elevator foot into position. To avoid damaging the projector, make sure that the elevator foot is fully retracted before placing the projector in its carrying case. ViewSonic 16 PJ506ED - ViewSonic PJ506ED | User Manual - Page 22
the Projector Zoom and Focus Zoom ring Focus ring 1. Focus the image by rotating the focus ring. A still image is recommended for focusing. 2. Adjust the image by rotating the zoom ring. Rotate to the right to reduce the image. Rotate to the left to enlarge the image. ViewSonic 17 PJ506ED - ViewSonic PJ506ED | User Manual - Page 23
.00 Position the projector in a horizontal position; other positions can cause heat build-up and damage to the projector. Make sure the heat ventilation holes are not blocked. Do not use the projector in a smoky environment. Smoke residue may cause buildup on critical parts. ViewSonic 18 PJ506ED - ViewSonic PJ506ED | User Manual - Page 24
Menu Operation The projector has multilingual On Screen Display menus that allow you to make image adjustments and change a variety of settings. ViewSonic 19 PJ506ED - ViewSonic PJ506ED | User Manual - Page 25
the settings with / buttons. 4. To return to the main menu, toggle button. 5. To exit OSD, press Menu button. The OSD menu will close and the projector will automatically save the new settings. ViewSonic 20 PJ506ED - ViewSonic PJ506ED | User Manual - Page 26
lighten the image. Keystone Adjusts image distortion caused by tilting the projector. Aspect Ratio Use this function to choose your desired image size. Film: Dark video image mode White Peaking The white peaking control adjusts the white peaking level of the DMD chip. 0 stands ViewSonic 21 PJ506ED - ViewSonic PJ506ED | User Manual - Page 27
adjusts red. Green Manually adjusts green. Blue Manually adjusts blue. Video (Video Mode) Saturation Adjusts a video image from black and white to fully saturated right. V.Position (Vertical Position) Press to move the image down. Press to move the image up. ViewSonic 22 PJ506ED - ViewSonic PJ506ED | User Manual - Page 28
to allow for proper high altitude cooling of the projector. Lamp Hours Displays Hour the lamp's elapsed operating time (in hours). Color Space Manually selects signal type. RGB YCbCr . Mute Choose "ON" to turn mute on. Choose "OFF" to turn mute off. ViewSonic 23 PJ506ED - ViewSonic PJ506ED | User Manual - Page 29
image quality. If any other parts need replacing, contact your dealer or qualified service personnel. When cleaning any part of the projector, always switch off and unplug the projector first. Warning: Never open any of use chemical sprays. Use a soft cloth or lens paper only. ViewSonic 24 PJ506ED - ViewSonic PJ506ED | User Manual - Page 30
, the mercury inside the lamp will go out of the projector. Leave the area immediately if the lamp shatters while being operated and ventilate the area for at least 30 minutes in order to avoid the inhalation of mercury fumes. Otherwise it could be harmful to user's health. ViewSonic 25 PJ506ED - ViewSonic PJ506ED | User Manual - Page 31
of glass, do not drop the unit and do not scratch the glass. Do not reuse the old lamp. This could cause the lamp to explode. Be sure to turn off the projector and unplug the AC power cord before replacing the lamp. Do not use the projector with the lamp cover removed. ViewSonic 26 PJ506ED - ViewSonic PJ506ED | User Manual - Page 32
Remote Control OSD Language Storage Temperature Operation Temperature Operation Humidity Power Requirement Power Consumption Dimension (W x D x H) Weight Single 0.55" DLP panel 800 x 600 Manual 6lb) Note: Design and Specifications are subject to change without prior notice. ViewSonic 27 PJ506ED - ViewSonic PJ506ED | User Manual - Page 33
Color Status Standby Green Flashing Off - The projector is powered and ready. Lamp Amber Solid Off - The projector system has some ignition problems with its fan, so the failure projector cannot start up. Power on Amber Solid Green Solid The projector is in good condition and is projecting - ViewSonic PJ506ED | User Manual - Page 34
Compatibility Modes Computer: Mode 480P VGA VGA VGA VGA VGA SVGA SVGA SVGA SVGA XGA XGA XGA XGA Mac16" SXGA SXGA 720P XGA XGA SXGA SXGA Mac 480-66A Resolution 640 x 480 640 x 480 Horizontal Frequency (kHz) 31.5 kHz 45.0 kHz 33.7 kHz Vertical Frequency (Hz) 60 Hz 60 Hz 30 Hz ViewSonic 29 PJ506ED - ViewSonic PJ506ED | User Manual - Page 35
Press remote control's or incorrectly supported by the projector. "Resync" button. displayed image. Image is unstable The signal timing of the Use "Phase" to correct it. or flickering. display does not synchronize Refer to Picture section. with the graphic card. Change the monitor color - ViewSonic PJ506ED | User Manual - Page 36
the and projector. remote control and projector. There are some fluorescent or Check that there are not other bright lights shining at any fluorescent or other the projector's infrared remote bright lights shining at the sensor. projector's infrared remote sensor. ViewSonic 31 PJ506ED - ViewSonic PJ506ED | User Manual - Page 37
880 818 NZ=0800 008 822 T= 65 64616044 T= 886 2 2246 3456 F= 886 2 2249 1751 T= 852 3102 2900 T= 853 700 303 T= 080 265 9080 [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] ViewSonic 32 PJ506ED - ViewSonic PJ506ED | User Manual - Page 38
of time. 4. Removal, installation, and set-up service charges. How to get service: 1. For information about receiving service under warranty, contact ViewSonic Customer Support (Please refer to Customer Support page). You will need to provide your product's serial number. ViewSonic 33 PJ506ED - ViewSonic PJ506ED | User Manual - Page 39
the original dated sales slip, (b) your name, (c) your address, (d) a description of the problem, and (e) the serial number of the product. 3. Take or ship the product freight prepaid in the original container to an authorized ViewSonic service center or ViewSonic. 4. For additional information - ViewSonic PJ506ED | User Manual - Page 40
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
 |
 |
PJ506ED
DLP Projector
ViewSonic
®
Model No. : VS11452
- User Guide
- Guide de l’utilisateur
- Bedienungsanleitung
- Guía del usuario
- Guida dell’utente
- Guia do usuário
- Användarhandbok
- Käyttöopas
- Pyководство пользователя
-
使用手冊 (繁體)
-
使用手冊(简体)