ViewSonic PJD5153 PJD5153 User Guide English - Page 55
Timing of replacing the lamp, Status, Message
View all ViewSonic PJD5153 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
1. Open the OSD menu and go to the SOURCE > Auto Power Off menu. 2. Press Enter and the Auto Power Off page is displayed. 3. Highlight Sleep Timer and press / . 4. If the preset time lengths are not suitable for your presentation, select Disable. The projector will not automatically shut down in a certain time period. Timing of replacing the lamp When the Lamp indicator light lights up red or a message appears suggesting it is time to replace the lamp, please install a new lamp or consult your dealer. An old lamp may cause a malfunction in the projector and in some instances the lamp may explode. CAUTION The Lamp indicator light and Temperature indicator light will light up if the lamp becomes too hot. Turn the power off and let the projector cool for 45 minutes. If the Lamp indicator light or Temperature indicator light still lights up after turning the power back on, please contact your dealer. See "Indicators" on page 50 for details. The following lamp warning displays will remind you to change the lamp. Status Install a new lamp for optimal performance. If the projector is normally run with Economic selected (See "Setting Lamp Mode as Economic" on page 47), you may continue to operate the projector until the next lamp warning appears. Message Notice Order Replacement Lamp Lamp > ____ Hours OK A new lamp should be fitted to avoid the inconvenience when the projector runs out of lamp time. Notice Replace Lamp soon Lamp > ____ Hours OK It is strongly recommended that you replace the lamp at this age. The lamp is a consumable item. The lamp brightness diminishes with use. This is normal lamp behavior. You can replace the lamp whenever you notice that the brightness level has significantly diminished. If the lamp is not replaced beforehand, it must be replaced when you see this message. The lamp MUST be replaced before the projector will operate normally. Notice Replace Lamp Now Lamp > ____ Hours Lamp usage time exceeded OK Notice Out of Lamp Usage Time Replace lamp (refer to User Manual) Then reset lamp timer OK 48