ViewSonic PJD5233 PJD5133, PJD5233, PJD5523W User Guide (English) - Page 20
Connecting Video source devices
View all ViewSonic PJD5233 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Connecting Video source devices You can connect your projector to various Video source devices that provide any one of the following output sockets: HDMI Component Video S-Video Video (composite) You need only connect the projector to a Video source device using just one of the above!connecting methods, however each provides a different level of video quality. The method!you choose will most likely depend upon the availability of matching terminals on both the!projector and the Video source device as described below: Terminal name HDMI Component Video S-Video Video Terminal appearance HDMI Reference "Connecting an HDMI source device" on page 17 Picture quality Best COMPUTER S-VIDEO "Connecting a Component Video source device" on page 18 "Connecting an SVideo source device" on page 18 Better Good VIDEO "Connecting a composite Video source device" on page 19 Normal Connecting an HDMI source device Examine your Video source device to determine if it has a set of unused HDMI output jacks available: If so, you can continue with this procedure. If not, you will need to reassess which method you can use to connect to the device. To connect the projector to an HDMI source device: 1. Take an HDMI cable and connect one end to the HDMI output jack of the HDMI source device. 2. Connect the other end of the HDMI cable to the HDMI jack on the projector. 17