Home » ViewSonic Manuals » Projectors » ViewSonic PJD6210-3D » Manual Viewer

ViewSonic PJD6210-3D User Guide

ViewSonic PJD6210-3D - XGA DLP Projector Manual

UPC - 766907345926

View all ViewSonic PJD6210-3D manuals

Add to My Manuals
Save this manual to your list of manuals

ViewSonic PJD6210-3D manual content summary:

ViewSonic PJD6210-3D | User Guide - Page 1
ViewSonic® PJD6210/PJD6210-WH DLP Projector IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide will describe your
ViewSonic PJD6210-3D | User Guide - Page 2
Cord must meet the requirement of countries where you use this projector. Please confirm your AC plug type with the graphics below Power Cord does not match your AC outlet, please contact your sales dealer. This projector is equipped with a grounding type AC line plug. Please ensure that your outlet
ViewSonic PJD6210-3D | User Guide - Page 3
Remote Control ...11 Replacing the Battery 12 Remote Control Operation 13 Installation ...14 Connecting the Projector 14 Powering On/Off the Projector 15 Adjusting the Projector 16 Menu Operation 18 Maintenance...22 Cleaning the Lens ...22 Cleaning the Projector Housing 22 Replacing the Lamp
ViewSonic PJD6210-3D | User Guide - Page 4
not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However could void your authority to operate the equipment. For Canada • This Class B digital apparatus complies with Canadian ICES-003. • Cet appareil ViewSonic PJD6210/PJD6210-WH
ViewSonic PJD6210-3D | User Guide - Page 5
guide for further instructions. 7. Do not block any ventilation openings. Install the unit in accordance with the manufacturer's instructions an electrician for replacement of the obsolete Refer all servicing to qualified service personnel. Servicing is required when ViewSonic PJD6210/PJD6210-WH
ViewSonic PJD6210-3D | User Guide - Page 6
below: Examples of exempted components are: 1. Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other lamps not specifically mentioned in the Annex of RoHS Directive. 2. Lead in weight and as a cooper alloy containing up to 4% lead by weight. ViewSonic PJD6210/PJD6210-WH
ViewSonic PJD6210-3D | User Guide - Page 7
XGA are registered trademarks of International Business Machines Corporation. Disclaimer: ViewSonic ViewSonic. For Your Records Product Name: Model Number: Document Number: Serial Number: Purchase Date: PJD6210/PJD6210-WH ViewSonic DLP Projector VS12179 PJD6210_UG_ENG Rev. 1A 04-02-08 The lamp
ViewSonic PJD6210-3D | User Guide - Page 8
friendly design to deliver high reliability and ease of use. The projector offers the following features: „ Single chip 0.55" Texas Instruments DLP® technology „ XGA (1024 x 768 pixels) „ Auto image re-sizing (Auto-Sync.) to 1024 x 768 full screen with scaling compression compatibility for VGA, SVGA
ViewSonic PJD6210-3D | User Guide - Page 9
Package Contents When you unpack the projector, make sure you have all these components: Projector with Lens Cap AC Power Cord Remote Control (IR) ViewSonic CD Wizard Quick Start Guide VGA Cable (D-SUB to D-SUB) „ Contact you dealer immediately if any items are missing, appear damaged, or if
ViewSonic PJD6210-3D | User Guide - Page 10
during projector usage to prevent from possible burning. „ Do not looking into the lens or vents while the lamp is on. Strong light ray may be harmful to eyes. „ Do not carry the projector by solely handling the adjustment feet. Projector may drop and be damaged. ViewSonic 7 PJD6210/PJD6210-WH
ViewSonic PJD6210-3D | User Guide - Page 11
holes (exhaust) Bottom View 1 2 1 Ceiling mount 2 Tilt-adjustment feet „ This projector can be used with a ceiling mount for support. The ceiling mount is not included in the package. „ Contact your dealer for information to mount the projector on a ceiling. ViewSonic 8 PJD6210/PJD6210-WH
ViewSonic PJD6210-3D | User Guide - Page 12
Control Panel LED 12 3 4 6 5 1 Lamp (Lamp LED your selection. - Manually select an input source. (Left button) - Resynchronize the projector to the input signal Lamp Hours Reset and Factory Default menu operations. 6 (Power) Turn the projector on or off. ViewSonic 9 PJD6210/PJD6210-WH
ViewSonic PJD6210-3D | User Guide - Page 13
Connection Ports 1 2 3 1 RS232 Reserved for installation control and firmware upgrades. 2 COMPUTER IN Connect image input signal (analog RGB or component) to this jack. 3 VIDEO Connect composite video output from video equipment to this jack. ViewSonic 0 PJD6210/PJD6210-WH
ViewSonic PJD6210-3D | User Guide - Page 14
. 9 Keystone+ / Adjust image distortion caused by tilting the projector. 8 ViewMatch 10 Freeze Switch in between high brightness Press "freeze" to pause the screen performance or Accuracy color image. Press again to cancel the freeze performance function. ViewSonic 1 PJD6210/PJD6210-WH
ViewSonic PJD6210-3D | User Guide - Page 15
the mark "+" is up. 3. Push the battery holder back into the remote control until you feel a click. Caution „ Risk of explosion if battery is replaced by an incorrect type. „ Dispose of used batteries according to the instructions. „ Make sure the plus and minus terminals are correctly aligned when
ViewSonic PJD6210-3D | User Guide - Page 16
sensor is visible. „ Do not drop the remote control or jolt it. „ Keep the remote control out of locations with excessively high temperature or humidity. „ Do not get water on the remote control or place wet objects on it. „ Do not disassemble the remote control. ViewSonic 3 PJD6210/PJD6210-WH
ViewSonic PJD6210-3D | User Guide - Page 17
type 1 2 3 4 „ When connecting cable, power cords of both projector and external equipment should be disconnected from AC outlet. „ The figure above is projector may differ from the above illustration. The included cables are based on actual shipment delivery. ViewSonic 4 PJD6210/PJD6210-WH
ViewSonic PJD6210-3D | User Guide - Page 18
without causing harm to the projector lamp. „ Using Off-To-Go function will interrupt projector's normal shutdown sequence. The previously interrupted shutdown sequence (3-5 min) still needs to be completed first prior the projector can power up the next time. ViewSonic 5 PJD6210/PJD6210-WH
ViewSonic PJD6210-3D | User Guide - Page 19
fully retracted before placing the projector in its carrying case. Adjusting the Projector Zoom and Focus Zoom ring Focus ring 1. Focus the image by rotating the focus ring. A still image is recommended for focusing. 2. Adjust the image by sliding the zoom ring. ViewSonic 6 PJD6210/PJD6210-WH
ViewSonic PJD6210-3D | User Guide - Page 20
between the sides of the projector. „ Do not use the projector in a smoky environment. Smoke residue may build- up on critical parts and damage the projector or its performance. „ Consult with your dealer for special installation such as suspending from a ceiling. ViewSonic 7 PJD6210/PJD6210-WH
ViewSonic PJD6210-3D | User Guide - Page 21
Menu Operation The projector has multilingual on-screen display menus that allow you to make image adjustments and change a variety of settings. *1 Adjustable range and default setting vary depending on signal type. ViewSonic 8 PJD6210/PJD6210-WH
ViewSonic PJD6210-3D | User Guide - Page 22
6. To exit OSD, Press the MENU button again. The OSD menu will close and the projector will automatically save the new settings. Picture (Computer / Video Mode) Brightness Brighten or darken screen type. White Intensity Increase the brightness of white areas. ViewSonic 9 PJD6210/PJD6210-WH
ViewSonic PJD6210-3D | User Guide - Page 23
component 480p,576p,720p,1080i signals Lamp Hours Display the lamp's elapsed operating time (in hours). Lamp Hours Reset Reset the lamp Hour to 0 hours. Power Saving If no operation is performed for a specific period of time, projector will automatically turn off. ViewSonic 20 PJD6210/PJD6210-WH
ViewSonic PJD6210-3D | User Guide - Page 24
input source. ECO Mode Use this function to dim the projector lamp light output which will lower power consumption and increase lamp life. „ This function will be unavailable when the DCR Factory Default (Computer / Video Mode) Restore settings to factory default . ViewSonic 21 PJD6210/PJD6210-WH
ViewSonic PJD6210-3D | User Guide - Page 25
. If any other parts need replacing, contact your dealer or qualified service personnel. When cleaning any part of the projector, always switch off and unplug the projector first. Warning Never open any of chemical sprays. „ Use a soft cloth or lens paper only. ViewSonic 22 PJD6210/PJD6210-WH
ViewSonic PJD6210-3D | User Guide - Page 26
message is displayed. Do not attempt to replace the lamp yourself. Contact the qualified service personnel for replacement. „ The lamp is extremely hot right after turning off the projector. If you touch the lamp, you may scald your finger. When you replace the lamp, wait for at least 45 minutes for
ViewSonic PJD6210-3D | User Guide - Page 27
do not drop the unit and do not scratch the glass. „ Do not reuse the old lamp. This could cause the lamp to explode. „ Be sure to turn off the projector and unplug the AC power cord before replacing the lamp. „ Do not use the projector with the lamp cover removed. ViewSonic 24 PJD6210/PJD6210-WH
ViewSonic PJD6210-3D | User Guide - Page 28
Specifications Display Type Single 0.55" DLP panel Resolution (Pixels) XGA (1024 × 768) Lens Manual Zoom (1.1x) Screen Size 30" - 300" Lamp 180W Input / Output Source kg (5.3lb) Note: Design and Specifications are subject to change without prior notice. ViewSonic 25 PJD6210/PJD6210-WH
ViewSonic PJD6210-3D | User Guide - Page 29
projector is shutting and the fan is cooling the lamp for shutdown. The lamp is going to reach its end of lifetime and must be changed soon. The fan has a breakdown. Temperature is too high. The lamp will turn off. The fan is cooling the lamp. The lamp ignition failed. ViewSonic 26 PJD6210/PJD6210
ViewSonic PJD6210-3D | User Guide - Page 30
Compatibility Modes Computer: Compatibility VGA Resolution 640 x 480 SVGA 800 x 600 XGA SXGA WXGA 1024 x 768 1152 x 864 1280 x 960 1280 x 1024 1280 x 768 1280 x 800 H-Sync [KHz] 31.5 37.9 37.5 43.3 35.2 37.9 48.1 46.9 Frequency (Hz) 60 60 50 50 60 50 60 50 ViewSonic 27 PJD6210/PJD6210-WH
ViewSonic PJD6210-3D | User Guide - Page 31
receiver on the front of the projector. Use the remote control within the effective range. „ Aim the remote control at the screen or at the front of the projector. „ Move the remote control so it is more directly in front of the projector and not as far to the side. ViewSonic 28 PJD6210/PJD6210-WH
ViewSonic PJD6210-3D | User Guide - Page 32
, 38, D2, EF, DB, 3E, DA, 89, DB, 58, DA, 57, D0, 86, D1, DF, DF, 3D, DE, 10, DB, 23, DB, F2, DA, 0D, DA, 6B, DA, BA, DB, D5, D9, 04, D8 , 00 06 6F, 00, 00, 00, 00, 00 Lamp Hour 70, 00, 00, 00, 00, 00 Version 71, 00, 00, 00, 00, 00 03:Projector ON (Normal Mode) ViewSonic 29 PJD6210/PJD6210-WH
ViewSonic PJD6210-3D | User Guide - Page 33
67 TXD 8 USB+5V Wire List C1 COLOR 4 RED 1 BLACK 7 GREEN SHELL D.W+BD C2 5 3 2 SHELL IR Control Code Button name Product ID Code Power 0x83 , 0xF4 Freeze 0x83 , 0xF4 Menu 0x83 , 0xF4 S 0x83 , 0xF4 W Hide The Image With Blank BrilliantColor ViewSonic 30 PJD6210/PJD6210-WH
ViewSonic PJD6210-3D | User Guide - Page 34
.com/uk/Support/Calldesk.htm United Kingdom United States www.viewsoniceurope.com/uk/ www.viewsonic.com www.viewsoniceurope.com/uk/Support/Calldesk.htm T (Toll-Free)= 1-800-688-6688 T (Toll)= 1-424-233-2530 F= 1-909-468-1202 [email protected] ViewSonic 31 PJD6210/PJD6210-WH
ViewSonic PJD6210-3D | User Guide - Page 35
, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product ViewSonic office for the warranty information. Lamp warranty subject to terms and conditions, verification and approval. Applies to manufacturer's installed lamp only. All accessory lamps
ViewSonic PJD6210-3D | User Guide - Page 36
, contact ViewSonic Customer Support (please refer to "Customer Support" page). You will need to provide your product's serial number. 2. To obtain warranted service, you will be required to provide (a) the original dated sales slip, (b) your name, (c) your address, (d) a description of the problem
ViewSonic PJD6210-3D | User Guide - Page 37
period of time. 4. Removal, installation, insurance, and set-up service charges. How to get service: For information about receiving service under warranty, contact ViewSonic Customer Support (Please refer to the attached Customer Support page). You will need to provide your product's serial
ViewSonic PJD6210-3D | User Guide - Page 38
Acapulco Monterrey: GS Computación (Grupo Sesicomp) Global Product Services Progreso #6-A, Colo Centro Mar Caribe # 1987, Esquina -13-67-00 E-Mail. [email protected] Tijuana: FOR USA SUPPORT: STD ViewSonic Corporation Av Ferrocarril Sonora #3780 L-C 381 Brea Canyon Road, Walnut, CA.
ViewSonic PJD6210-3D | User Guide - Page 39

Section	Page
VPD-X450_En_0403.pdf	8
Projector Features	8
Package Contents	9
Projector with Lens Cap	9
AC Power Cord	9
VGA Cable (D-SUB to D-SUB)	9
Projector Overview	10
Using the Product	12
Control Panel	12
Connection Ports	13
Remote Control	14
Replacing the Battery	15
1. Push the catch to the left and remove the battery holder.	15
2. Remove the old Lithium coin cell and install new one (CR2025). Ensure that the side with the mark “+” is up.	15
3. Push the battery holder back into the remote control until you feel a click.	15
Remote Control Operation	16
Installation	17
Connecting the Projector	17
Powering On/Off the Projector	18
Powering On the Projector:	18
1. Remove the projector lens cap.	18
2. Complete the AC power cord and peripheral signal cable(s) connections.	18
3. Press button on the control panel or the POWER button on the remote control to turn on the projector. The projector takes a minute or so to warm up.	18
4. Turn on your source (computer, notebook, DVD, etc.). The projector automatically detects your source.	18
Powering Off the Projector:	18
1. Press button on the control panel or the POWER button on the remote control to turn off the projector lamp. You will see a message \	18
2. Press button on the control panel or the POWER button on the remote control again to confirm.	18
3. Disconnect the AC power cord from the electrical outlet and the projector.	18
4. Do not turn on the projector right after power off.	18
5. This projector supports Off-To-Go function. User can safely cut off the power source immediately without causing harm to the projector lamp.	18
Adjusting the Projector	19
Adjusting the Projector Height	19
Adjusting the Projector Zoom and Focus	19
1. Focus the image by rotating the focus ring. A still image is recommended for focusing.	19
2. Adjust the image by sliding the zoom ring.	19
Adjusting Projection Image Size	20
Menu Operation	21
1. Press the MENU button to open the OSD menu.	22
2. When OSD is displayed, use p / q to select any feature in the main menu.	22
3. After selecting the desired main menu feature, press u to enter sub-menu for feature setting.	22
4. Adjust the settings with t / u.	22
5. Press the MENU button, the screen will return to the main menu.	22
6. To exit OSD, Press the MENU button again. The OSD menu will close and the projector will automatically save the new settings.	22
Maintenance	25
Cleaning the Lens	25
Cleaning the Projector Housing	25
Replacing the Lamp	26
1. Turn off the projector.	27
2. Unplug the power cord.	27
3. Loosen the screw in the lamp cover and remove the cover.	27
4. Loosen the two screws from the lamp module.	27
5. Pull up the handle, and then pull out the lamp unit by the handle.	27
6. Insert a new lamp module into the projector and tighten the screws.	27
7. Replace the lamp cover and tighten the screw.	27
8. Turn on the projector. If the lamp does not turn on after the warm-up period, try reinstalling the lamp.	27
9. Reset the lamp hour. Refer to the Setting (Computer / Video Mode) menu.	27
Specifications	28
Appendix	29
LED Indicator Messages	29
Compatibility Modes	30
Computer:	30
Video:	30
Troubleshooting	31
Start-up problems	31
Image problems	31
RS-232 Command and Configuration	32