ViewSonic PJD6223 PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 26

Operation, Starting up the projector

Get ViewSonic PJD6223 PDF manuals and user guides View all ViewSonic PJD6223 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

Operation Starting up the projector 1. Plug the power cord into the projector and into a wall socket. Turn on the wall socket switch (where fitted). Check that the POWER indicator light on the projector flashes blue after power has been applied. 2. Remove the lens cap. If it is closed, it could become deformed due to the heat produced by the projection lamp. 3. Press II POWER on the projector or remote control to start the projector. The POWER indicator light stays blue when the projector is on. (If necessary) Rotate the focus ring to adjust the image clearness. • If the projector is still hot from previous activity, it will run the cooling fan for approximately 90 seconds before energizing the lamp. • To maintain the lamp life, once you turn the projector on, wait at least 5 minutes before turning it off. 4. If the projector is activated for the first time, select your OSD language following the onscreen instructions. 5. Switch all of the connected equipment on. ZOOM MENU EXIT SOURCE MTEEOMPNDTEER LMAMPUTO MENU EXIT SOURCE MTEEOMPNDTEER LMAMPUTO 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
21
Operation
Starting up the projector
1.
Plug the power cord into the projector and into a
wall socket. Turn on the wall socket switch
(where fitted). Check that the
POWER
indicator light
on the projector flashes blue
after power has been applied.
2.
Remove the lens cap. If it is closed, it could
become deformed due to the heat produced by
the projection lamp.
3.
Press
POWER
on the projector or remote
control to start the projector. The
POWER
indicator light
stays blue when the projector is
on.
(If necessary) Rotate the focus ring to adjust the
image clearness.
•
If the projector is still hot from previous activity, it
will run the cooling fan for approximately 90
seconds before energizing the lamp.
•
To maintain the lamp life, once you turn the
projector on, wait at least 5 minutes before turning
it off.
4.
If the projector is activated for the first time,
select your OSD language following the on-
screen instructions.
5.
Switch all of the connected equipment on.
ZOOM
MODE
ENTER
AUTO
SOURCE
MENU
EXIT
I
I