ViewSonic PJD7835HD PJD7830HDL User Guide English - Page 52
Using the projector in standby mode, Adjusting the sound, Adjusting the audio mode
View all ViewSonic PJD7835HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Using the projector in standby mode Some of the projector functions are available in standby mode (plugged in but not turned on). To use these functions, be sure you have turned on the corresponding menus under SOURCE > Standby Settings, and the cable connections are correctly made. For the connection methods, see the "Connection" on page 14 chapter. Active VGA out Selecting On outputs a VGA signal when the COMPUTER IN and COMPUTER OUT sockets are correctly connected to devices. The projector outputs the signal received only from COMPUTER IN. Active Audio out Selecting On outputs an audio signal when the AUDIO IN 1 socket is correctly connected to a proper device. Adjusting the sound The sound adjustments made as below will have an effect on the projector speaker. Be sure you have made a correct connection to the projector audio input/output jacks. See "Connection" on page 14 for more details. Adjusting the audio mode 1. Open the OSD menu and go to the SYSTEM SETTING: ADVANCED > Audio Settings > Audio Mode menu. 2. Press / to select a preferred audio mode. • If available, you can press Audio Mode on the remote control to select a preferred audio mode. Muting the sound 1. Open the OSD menu and go to the SYSTEM SETTING: ADVANCED > Audio Settings > Mute menu. 2. Press / to select On. • If available, you can press and off. on the remote control to toggle the projector audio between on Adjusting the sound level 1. Open the OSD menu and go to the SYSTEM SETTING: ADVANCED > Audio Settings > Audio Volume menu. 2. Press / to select a desired sound level. • If available, you can press / on the remote control to adjust the projector's sound level. 41