ViewSonic PJL3211 PJL3211 User Guide (English)
ViewSonic PJL3211 - XGA DLP Projector Manual
 |
UPC - 766907337617
View all ViewSonic PJL3211 manuals
Add to My Manuals
Save this manual to your list of manuals |
ViewSonic PJL3211 manual content summary:
- ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 1
ViewSonic® PJL3211 XGA LCD Projector - User Guide - Guide de l'utilisateur - Bedienungsanleitung - Guía del usuario - Guida dell'utente - Guia do usuário - Användarhandbok - Käyttöopas Model No. : VS12417 - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 2
used in accordance with the instructions, may cause harmful interference to turning the equipment off and on, the user is encouraged to try to correct the interference B est conforme à la norme NMB-003 du Canada. CE Conformity for European Countries The device complies with ViewSonic PJL3211 - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 3
in this guide for further instructions. 7. Do not block any ventilation openings. Install the unit in accordance with the manufacturer's instructions. 8. into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 4
temperature type solders (i.e. lead-based alloys containing 85% by weight or more lead). 4. Lead as an allotting element in steel containing up to 0.35% lead by weight, aluminium containing up to 0.4% lead by weight and as a cooper alloy containing up to 4% lead by weight. ViewSonic iii PJL3211 - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 5
product improvement, ViewSonic Corporation reserves the right to change product specifications without notice. Model Number: Document Number: Serial Number: Purchase Date: PJL3211 ViewSonic XGA LCD Projector VS12417 PJL3211_UG_ENG Rev. 1A 10-14-08 Personal Identification Number (PIN): The lamp - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 6
Projector PJL3211 User's Manual (detailed) - Operating Guide Contents of package (1) Projector (2) Remote control with two AA batteries (3) Power cord (4) RGB cable (1) (5) Soft case (6) Quick Start Guide and ViewSonic Wizard CD (7) Lens cover, Rivet and Strap (4) (8) Video/Audio cable - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 7
Filter time, My button, Service, Security Adjusting the volume 14 Temporarily muting the sound. . . . . 14 Selecting an input signal 14 Searching an input signal 15 Maintenance 48 Lamp 48 Air filter 50 Other care 51 Selecting an aspect ratio 15 Troubleshooting 52 Adjusting the projector - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 8
from even a short distance. This projector has very compact and stylish design. Also in such compact body, high power optical engine is mounted, which can make high bright image on screen. Preparations Contents of package Please see the "Contents of package" in the "User's Manual (concise)" which - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 9
Do not use the security slot to prevent the projector from falling down, since it is not designed for it. ►Use the shutdown switch only when the projector is not turned off by normal procedure, since pushing this switch stops operation of the projector without cooling it down. ViewSonic PJL3211 - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 10
buttons. (4) POWER indicator (13, 53) (5) TEMP indicator (53) (6) LAMP indicator (53) (1) (2) (3) (4) (5) (6) STANDBY/ON INPUT/ ENTER MENU LAMP TEMP POWER Remote control (1) for selecting only a PC input. This model does not have any function about STORAGE device. ViewSonic PJL3211 - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 11
Setting up Setting up Install the projector according to the environment and manner the projector will be used in. Arrangement Refer to the illustrations and tables below to 54 21 327 129 7.1 278 8.5 334 7 3 304 120 7.8 306 9.3 368 65 26 392 154 8.5 334 10.2 400 8 3 365 144 ViewSonic PJL3211 - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 12
Placing the projector in such places could cause fire, electric shock and/or malfunction of the projector. • Do not place the projector near humidifiers, smoking spaces or a kitchen. ►Position the projector to prevent light from directly hitting the projector's remote sensor. ViewSonic PJL3211 - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 13
/Audio cable and Audio adapter. WARNING ►Do not disassemble or modify the projector and accessories. ►Be careful not to damage the cables, and do not use damaged cables. CAUTION ►Turn off all devices and unplug their power cords prior to connecting them to projector. Connecting a live device to - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 14
projector, be sure to activate the PC's external RGB output. (Set the laptop PC to CRT display or to simultaneous LCD and CRT display.) For details on how this is done, please refer to the instruction manual drivers in your pc as this projector is a Plug-and-Play monitor. ViewSonic PJL3211 - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 15
Setting up Connecting power supply 1. Put the connector of the power cord into the AC inlet of the projector. POWER indicator POWER 2. Firmly plug the power cord's plug into the outlet. In a couple of seconds after the power supply connection, the POWER indicator will light up in steady orange. - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 16
. • The remote control may not work correctly if strong light (such as direct sun light) or light from an extremely close range (such as from an inverter fluorescent lamp) shines on the remote sensor of the projector. Adjust the position of projector avoiding those lights. ViewSonic 11 PJL3211 - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 17
the SERVICE item of the OPTION menu (41) of the projector to be controlled should be set to PC. Be sure to check your PC's manuals before connecting this product to the PC. (5) projector is working properly. This function is not available while the lamp is warming up (the POWER indicator flashes - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 18
the STANDBY/ON button again while the message appears. The projector lamp will go off, and the POWER indicator will begin blinkinENgTERin orange. Then the POWER indicator will stop blinking and light in steady orange when the lamp cooling is complete. ESC RESET 3. Attach the lens cover, after - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 19
COMPUTER IN2 VIDEO S-VIDEO ESC RESET INPUT/ENTER STANDBY/ON INPUT/ ENTER MENU LAMP TEMP POWER 1. Press the COMPUTER/STORAGE button on the remote control. Each time you press the button, the projector switches its input port as below. COMPUTER IN1 COMPUTER IN2 COMPUTER /STORAGE COMPUTER - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 20
input signal 1. Press the SEARCH button on the remote control. SEARCH The projector will start to check its input ports in order to find any input mode keeps the original aspect ratio setting. ● Performing the automatic adjustment initializes the aspect ratio setting. ViewSonic 15 PJL3211 - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 21
the projector exceeding the restriction could cause malfunction or shortening the lifetime of consumables, or the projector itself. Adjusting the zoom and focus 1. Use the zoom ring to adjust the screen size. 2. Use the focus ring to focus the picture. Focus ring Zoom ring ViewSonic 16 PJL3211 - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 22
performed on a video signal, s-video signal, or component video signal, the range of this adjustment depends on the OVER SCAN in the IMAGE menu (26) setting. It is not possible to adjust when the OVER SCAN is set to 10. ViewSonic 17 PJL3211 - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 23
MANUAL operation, MANUAL projector screen is inclined or angled downward, this function may not work correctly. ● When the zoom adjustment is set set to the full WIDE (wide-angle focus) whenever possible. ● When the projector projector and the projector will go The projector the projector exits from - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 24
) is pressed. ● If the projector continues projecting a still image for a long time, the LCD panel might possibly be burned in. Do not leave the projector in the FREEZE mode for too not connected with the blank screen function. If necessary, set the volume or mute first. ViewSonic 19 PJL3211 - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 25
VOLUME 1. Press the MENU button on the remote control or the projector. INPUT/ENTER button MENU button OFF END PAGE DOWN MUTE ENTER that STANDBY/ON INPUT/ ENTER MENU LAMP TEMP POWER ESC ENTER RESET has priority just after powered on, will appear. AUTO BLANK ViewSonic 20 PJL3211 - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 26
◄/► buttons switches the picture mode. The picture modes are combinations of GAMMA and COLOR TEMP settings. Choose a suitable mode according to the projected source. NORMAL ó CINEMA ó DYNAMIC WHITEBOARD ó , a certain extra such as a line may appear. (continued on next page) ViewSonic 21 PJL3211 - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 27
in SETUP menu (32). Performing this item resets all of the EASY MENU items except the FILTER TIME and LANGUAGE. A dialog is displayed for confirmation. Selecting the RESET using the ▲ button performs to use the menu of PICTURE, IMAGE, INPUT, SETUP, SCREEN or OPTION. ViewSonic 22 PJL3211 - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 28
07 5*#420'55 14;5#8' Item BRIGHTNESS CONTRAST Description Using the ▲/▼ buttons adjusts the brightness. Light ó Dark Using the ▲/▼ buttons adjusts the contrast. Strong ó Weak Using the ▲/▼ buttons , lines or other distortion may appear. (continued on next page) ViewSonic 23 PJL3211 - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 29
may be some noise and/or the screen may flicker for a moment when an adjustment is made. This is not a malfunction. (continued on next page) ViewSonic 24 PJL3211 - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 30
) PICTURE Menu Item MY MEMORY Description This projector has 4 memories for adjustment data (for The LOAD functions can be also performed by the MY MEMORY button which can be set by the MY BUTTON item in OPTION menu (29). SAVE1, SAVE2, SAVE3, SAVE4 data into the memory. ViewSonic 25 PJL3211 - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 31
the default setting. • When this function is performed on a video signal, s-video signal, or component video signal, the range of this adjustment depends on the OVER SCAN (above) setting. It is not possible to adjust when the OVER SCAN is set to 10. (continued on next page) ViewSonic 26 PJL3211 - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 32
will be automatically set to the default. For a component video signal, also the horizontal phase will be automatically set to the default. • The automatic adjustment operation requires about 10 seconds. Also please note that it may not function correctly with some input. ViewSonic 27 PJL3211 - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 33
) or 625i (576i) signal. • When TV or FILM is selected, the screen image will be sharp. FILM adapts to the 2-3 Pull-Down conversion system. But these may cause a certain defect (for example, jagged line) of the to select a suitable mode except AUTO. (continued on next page) ViewSonic 28 PJL3211 - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 34
. In such a case, please select the TURN OFF. COMPUTER IN Set the computer input signal type for the ports of COMPUTER. (1) Use the ◄/► Component signal can be supported through COMPUTER IN1 port, if AUTO is selected for the COMPUTER IN1 port. (continued on next page) ViewSonic 29 PJL3211 - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 35
Item RESOLUTION Description The resolution for the COMPUTER IN1 and COMPUTER IN2 input signals can be set on this projector. (1) In the INPUT menu select the RESOLUTION using the ▲/▼ buttons and press the resolution. • For some pictures, this function may not work well. ViewSonic 30 PJL3211 - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 36
MIRROR item in the SETUP menu, if the projector screen is inclined or angled downward, this function may not work correctly. • When the zoom adjustment is set to the TELE (telephoto focus), this function may when the Transition Detector is on (46). (continued on next page) ViewSonic 31 PJL3211 - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 37
TURN ON and MIRROR status is changed, Transition Detector Alarm (46) will be displayed when projector is restarted after the power switch is turned off. Using the ▲/▼ buttons adjusts the volume. High ó Low Allocates the input port, and any items in AUDIO menu are invalid. ViewSonic 32 PJL3211 - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 38
. • To avoid remaining as an afterimage, the MyScreen or ORIGINAL screen will change to the plain black screen after several minutes. (continued on next page) ViewSonic 33 PJL3211 - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 39
ON is selected to the MyScreen PASSWORD of SECURITY item in OPTION menu (43), the START UP is fixed to MyScreen. (continued on next page) ViewSonic 34 PJL3211 - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 40
function cannot be selected when the TURN ON is selected to the MyScreen PASSWORD of SECURITY item in OPTION menu (43). (continued on next page) ViewSonic 35 PJL3211 - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 41
the picture is freezing. Do not mistake freezing for a malfunction (19). Each input port for this projector can have a name applied to it. (1) Use the ▲/▼ buttons on the SCREEN menu to select button 4'5'6 37+6 '06'4 0':6 and the INPUT button simultaneously. ViewSonic 36 PJL3211 - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 42
to execute the item, except for the items LAMP TIME and FILTER TIME. Then perform it according to the set to the TURN ON, the lamp in projector will be automatically turned on without the usual procedure (13), only when the projector is supplied with the power after the power was cut while the lamp - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 43
the RESET using the ▲ button. RESET ï CANCEL • Please reset the filter time only when you have cleaned or replaced the air filter, for a suitable indication about the air filter. • For the air filter cleaning, see the section "Air filter" (50). (continued on next page) ViewSonic 38 PJL3211 - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 44
loading a data. • PICTURE MODE: Changes the PICTURE MODE (21). • FILTER RESET: Displays the filter time reset confirmation dialogue (38). • VOLUME+: Set the volume up. • VOLUME-: Set the volume down. Selecting this item displays the SERVICE menu. Select an item using the ▲/▼ buttons, and press the - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 45
reduce the lifetime of the projector. • It is recommended to choose "100h" in general. Please be careful with the operating environment of the projector and the condition of the air filter, especially when the "200h", "300h" or "TURN OFF" is chosen. (continued on next page) ViewSonic 40 PJL3211 - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 46
RESET using the button ▲ performs this function. By this function, all the items in all of menus will collectively return to the initial setting. Note that the items LAMP TIME, FILTER TIME, LANGUAGE and SECURITY are not reset. RESET ï CANCEL (continued on next page) ViewSonic 41 PJL3211 - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 47
Menu (continued) Item SECURITY Description This projector is equipped with security functions. User registration is required before using the security 37+6 0':6 5'%74+6; 0'92#55914&#)#+0 %#0%'. 1- 5'%74+6; 016'0'92#55914& '06'4 ':+6 ViewSonic 42 PJL3211 - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 48
press and hold the INPUT and ► buttons on the projector for about 3 seconds The 10 digit Inquiring Code will be sent after your user registration information is confirmed. SECURITY the MyScreen PASSWORD on/off menu. 2.2 Setting the PASSWORD 2.2-1 Display the MyScreen on/ ViewSonic 43 PJL3211 - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 49
will be unavailable. • The START UP setting will be locked on MyScreen (and the Your PASSWORD will be sent after your user registration information is confirmed. /[5ETGGP '06 PIN LOCK is a function which prevents the projector from being used unless a registered Code is ViewSonic 44 PJL3211 - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 50
5 minutes while the Inquiring Code is displayed the projector will turn off. 2+0$1: +PSWKTKPI%QFG 3.3-2 Contact your dealer with the 10 digit Inquiring Code. Your PASSWORD will be sent after your user registration information is confirmed. (continued on next page) ViewSonic 45 PJL3211 - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 51
for about 5 minutes the lamp will turn off. This function will activate only when the projector is started after the power switch was turned off. 4.2 Setting the Transition Detector PASSWORD 4.2-1 do not forget your Transition Detector PASSWORD. (continued on next page) ViewSonic 46 PJL3211 - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 52
OPTION Menu OPTION Menu (continued) Item Description 4.3 Setting the Transition Detector off 4.3-1 Follow the procedure in 4.1-1 to display the your dealer with the 10 digit Inquiring Code. Your PASSWORD will be sent after your user registration information is confirmed. ViewSonic 47 PJL3211 - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 53
to select "RESET" on the dialog. It performs resetting the lamp time. CAUTION ►Do not touch any inner space of the projector, while the lamp is taken out. NOTE • Please reset the lamp time only when you have replaced the lamp, for a suitable indication about the lamp. ViewSonic 48 PJL3211 - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 54
.ca (in Canada). For more information, call your dealer. • If the lamp should break (it will make a loud bang when it does), unplug the power cord from the outlet, and make sure to request a replacement lamp from your local dealer. Note that shards of glass could damage the projector's internals, or - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 55
will come together with a replacement lamp for this projector. Cleaning the air filter 1. Turn the projector off, and unplug the power cord. Allow the projector to sufficiently cool down. 2. Use a vacuum cleaner on and around the filter cover. 3. While supporting the projector with one hand, use - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 56
of the projector according to the following. Incorrect care could cause not only an injury but adverse influence such as discoloration, peeling paint, etc. ►Do not use cleaners or chemicals other than those specified in this manual. ►Do not polish or wipe with hard objects. ViewSonic 51 PJL3211 - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 57
set FAN SPEED of the SERVICE item in the OPTION menu to HIGH. REMINDER A note of precaution when cleaning the air filter. *** HRS PASSED AFTER THE Please immediately turn the power off, and clean or change LAST FILTER CHECK. the air filter referring to the "Air Filter" section of this manual - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 58
Troubleshooting Regarding the indicator lamps When operation of the LAMP, TEMP and POWER indicators differs from usual, check and cope with it according to the following table. POWER LAMP TEMP indicator indicator indicator Description Lighting Turned Turned The projector is in a standby state. - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 59
Shutdown switch K Resetting all settings When it is hard to correct some wrong settings, the FACTORY RESET function of the SERVICE item in the OPTION menu (41) can reset all settings(except LANGUAGE, FILTER TIME, LAMP TIME, FILTER MESSAGE and etc.) to the factory default. ViewSonic 54 PJL3211 - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 60
the lamp and lamp cover, and then turn the power on again. The signal cables are not correctly connected. Correctly connect the connection cables. Neither sounds Signal source does not correctly work. nor pictures are Correctly set up the signal source device by referring to the outputted. manual - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 61
Troubleshooting function or the remote control. The computer cannot detect the projector as a plug and play monitor. Make sure that the computer . The lamp is approaching the end of its product lifetime. Replace the lamp. Either the focus and/or horizontal phase settings are not ViewSonic 56 PJL3211 - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 62
Panel Pixels Lens Lamp Speaker Power supply Power consumption Temperature range Size Weight (mass) Ports Optional parts Specification Liquid crystal projector 1.6 cm USB USB-B x1 Lamp: RLC-039(DT00821) Air filter: Please consult your dealer. K 205 ViewSonic 73 274 57 59 [unit: mm] PJL3211 - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 63
Setting code low high Action (byte_0 - 1) Action Classification Content 1 SET Change setting to desired value. 2 GET Read projector internal setup value. 4 INCREMENT Increment setup value by 1. 5 DECREMENT Decrement setup value by 1. 6 EXECUTE Run a command. ViewSonic 58 PJL3211 - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 64
an undefined command or data. • Provide an interval of at least 40ms between the response code and any other code. • The projector outputs test data when the power supply is switched ON, and when the lamp is lit. Ignore this data. • Commands are not accepted during warm-up. ViewSonic 59 PJL3211 - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 65
Type Header CRC Command Data Action Type Setting Code Power Input Source Error Status Set Turn off BE EF 03 06 ] [Lamp error] 04 00 05 00 06 00 07 00 [Temp error] [Air flow error] [Lamp time error] [Cool error] 08 00 09 00 10 00 [Filter error] (Filter missing ViewSonic 60 PJL3211 - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 66
Increment BE EF 03 BE EF 03 Decrement BE EF 03 User Gamma Point 8 Get Increment BE EF 03 BE EF 03 Decrement BE EF 03 COLOR TEMP COLOR TEMP GAIN R COLOR TEMP GAIN G Set HIGH MID LOW Hi-BRIGHT-1 Hi-BRIGHT-2 CUSTOM-1 CUSTOM 00 00 00 00 00 00 00 00 00 00 00 00 00 ViewSonic 61 PJL3211 - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 67
72 02 73 80 D0 49 73 2F 73 FE 72 7C D1 F1 72 97 72 46 73 C4 D0 Command Data Action Type Setting Code 02 00 04 00 05 00 02 00 04 00 05 00 02 00 04 00 05 00 02 00 04 00 05 00 00 00 00 01 00 02 00 03 00 00 00 01 00 02 00 00 00 01 00 02 00 03 00 00 00 ViewSonic 62 PJL3211 - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 68
CRC 9E D0 0E D1 CE D6 FE D1 5E DD AD D0 91 70 F7 70 26 71 EC D9 Command Data Action Type Setting Code 01 00 01 00 01 00 01 00 01 00 02 00 02 00 04 00 05 00 06 00 08 20 08 20 00 02 00 08 00 07 00 00 00 0A 00 04 00 05 00 09 00 02 00 08 00 07 00 00 00 ViewSonic 63 PJL3211 - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 69
BE EF 03 Get BE EF 03 COMPUTER 2 Set SYNC ON G OFF BE EF 03 AUTO BE EF 03 Get BE EF 03 FRAME LOCK Set KEYSTONE V KEYSTONE V Reset WHISPER Set MIRROR Set VOLUMECOMPUTER1 VOLUMECOMPUTER2 VOLUME-Video VOLUME-S-Video TURN OFF 00 00 00 00 00 00 00 00 00 00 00 00 00 ViewSonic 64 PJL3211 - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 70
OL ITALIANO NORSK NEDERLANDS PORTUGUÊS MENU POSITION H MENU POSITION H Reset ViewSonic SVENSKA PУCCKИЙ SUOMI POLSKI TÜRKÇE Get Get Increment Decrement Execute Header CRC Command Data Action Type Setting Code BE EF 03 BE EF 03 BE EF 03 06 00 00 0F 00 00 00 00 00 00 00 00 00 00 00 65 PJL3211 - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 71
POSITION V MENU POSITION V Reset BLANK Set BLANK On/Off Set START UP Set My Screen LOCK Set MESSAGE Set AUTO SEARCH Set AUTO OFF AUTO ON Set LAMP TIME LAMP TIME Reset FILTER TIME FILER TIME Reset AUTO KEYSTONE EXECUTE 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00 00 ViewSonic 66 PJL3211 - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 72
FREEZE Get RS-232C Communication (continued) Header CRC Command Data Action Type Setting Code BE EF 03 BE EF 03 BE EF 03 BE EF 03 BE EF 03 BE EF 03 06 00 06 00 06 00 00 07 30 07 30 07 30 02 30 02 30 02 30 00 00 00 00 00 00 00 00 01 00 00 00 ViewSonic 67 PJL3211 - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 73
technical support or product service, see the table below or contact your reseller. Note : You will need the product serial number. Country/Region Australia/New Zealand Canada Europe/Middle East/Baltic countries/North Africa Hong Kong India Korea Latin America (Argentina) Web Site www.viewsonic - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 74
for an extended period of time. 4. Removal, installation, and set-up service charges. How to get service: 1. For information about receiving service under warranty, contact ViewSonic Customer Support (please refer to "Customer Support" page). You will need to provide your product's serial number - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 75
) is subject to the terms and conditions of the Maintenance Guarantee Card. For users in Europe and Russia, full details of warranty provided can be found in www. viewsoniceurope.com under Support/Warranty Information. 4.3: Projector Warranty ViewSonic PRJ_LW01 Rev. 1h 06-25-07 70 PJL3211 - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 76
for an extended period of time. 4. Removal, installation, insurance, and set-up service charges. How to get service: For information about receiving service under warranty, contact ViewSonic Customer Support (Please refer to the attached Customer Support page). You will need to provide your product - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 77
Service (Centro Autorizado de Servicio) within Mexico: Name, address, of manufacturer and importers: México, Av. de la Palma #8 Piso 2 Despacho 203, Corporativo Interpalmas, Col. San Fernando Huixquilucan, Estado de México Tel: (55) 3605-1099 http://www.viewsonic Services USA SUPPORT: ViewSonic - ViewSonic PJL3211 | PJL3211 User Guide (English) - Page 78
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
 |
 |
PJL3211
XGA LCD Projector
ViewSonic
®
Model No. : VS12417
- User Guide
- Guide de l’utilisateur
- Bedienungsanleitung
- Guía del usuario
- Guida dell’utente
- Guia do usuário
- Användarhandbok
- Käyttöopas
-
Руководство
пользователя
-
使用手冊 (繁體)
-
使用手冊 (簡體)
-
사용자 안내서