ViewSonic PS502W User Guide English - Page 58
Lamp Se²ngs
View all ViewSonic PS502W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Menu Advanced Lamp Settings Description Direct Power On Automatically power on the projector when AC power is supplied, without pressing the Power button on the projector or the remote control. Auto Power Off A countdown timer will start when there is no signal being sent to the projector. The projector will automatically power off when the countdown has finished (in minutes). Power Mode (Standby) Option Active Eco Description Normal standby (> 0.5W) with VGA available. Reduce power use (< 0.5W) with no VGA available. Signal Power On Automatically power on the projector when a signal is detected from the input source, without pressing the Power button on the projector or on the remote control. NOTE: The projector will not power on automatically by HDMI if there is only one HDMI cable connected. Exit Exit the Advanced menu. Lamp Hour Displays the lamp hours of the current lamp. Lamp Reminder Show or to hide a warning message when the "change lamp message" is displayed. Brightness Mode Option Bright Eco Dynamic Description Highest brightness and power consumption. Dim the light output, lowering power consumption. Automatically adjust the picture brightness in order to give optimum contrast performance. Lamp Reset Resets the Lamp Hour counter. Should be used after replacing the lamp. Exit Exit Lamp Settings. 58