ViewSonic PX706HD - 1080p Short Throw Gaming Projector with 3000 Lumens Low Inpu - Page 44
Function, Description, Auto Power On, Smart Energy, Standby, Settings, Smart Restart, Quick Power
View all ViewSonic PX706HD - 1080p Short Throw Gaming Projector with 3000 Lumens Low Input Lag and USB C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
3. POWER MANAGEMENT menu Function Description Auto Power On Signal Selecting VGA/HDMI allows the projector to turn on automatically once the VGA/HDMI signal is fed through the VGA/HDMI cable. You can also select All and the projector will turn on automatically upon receiving either a VGA or HDMI signal. CEC See "Using the CEC function" on page 31 for details. Direct Power On Selecting On allows the projector to turn on automatically once the power is fed through the power cord. Auto Power Off See "Setting Auto Power Off" on page 45 for details. Smart Energy Sleep Timer See "Setting Sleep Timer" on page 46 for details. Standby Settings Power Saving See "Setting Power Saving" on page 46 for details. See "Using the projector in standby mode" on page 32 for details. Smart Restart Selecting Enable enables you to restart the projector immediately within 120 seconds after turning it off. After 120 seconds, if the projector is not turned on again, it will directly enter the standby mode. It takes some time to initiate this function. Make sure the projector has been turned on for more than 4 minutes. If the projector is resumed by using the Smart Restart feature, this function can be executed immediately. Quick Power Off When Enable is selected, the Quick Power Off function will be automatically set to "Enable". Selecting Enable enables the function and the projector will not enter the cooling process after being shut down. Selecting Disable disables the function and the projector will enter normal cooling process after being shut down. If you attempt to restart the projector right after it's been turned off, it may not be turned on successfully and will rerun its cooling procedure. When Disable is selected, the Smart Restart function will be automatically turned off. 39