ViewSonic Pro9000 PRO9000 User Guide (English) - Page 42

Image is reversed

Get ViewSonic Pro9000 PDF manuals and user guides View all ViewSonic Pro9000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 42 highlights

Image has vertical flickering bar `` Use "Frequency" to make an adjustment. Refer to the "VIDEO/AUDIO | Computer Mode" section for more information. `` Check and reconfigure the display mode of your graphic card to make it compatible with the product. Image is out of focus `` Make sure the lens cap is removed. `` Adjust the "Focus Ring" on the projector lens. `` Make sure the projection screen is within the required distance of 4.1-16.4 feet (1.3-5.0 meters) from the projector. The image is stretched when displaying 16:9 DVD title When you play anamorphic DVD or 16:9 DVD, the projector will show the best image in 16: 9 format on projector side. `` If you play 4:3 format DVD title, please change the format as 4:3 in projector OSD. `` If the image is still stretched, you will also need to setup the display format as 16:9 (wide) aspect ratio type on your DVD player. Image is too small or too large `` Move the projector closer to or further from the screen. `` Press "Menu" on the control panel. Go to "SETTING" --> "Aspect Ratio"and try the different settings. Image has slanted sides: `` If possible, reposition the projector so that it is centered on the screen and below the bottom of the screen. `` Use "SETTING" --> "V Keystone" from the OSD to make an adjustment. Image is reversed `` Adjust the "Projection" to correct it. Refer to the "SETTING" section for more information. 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
41
Image has vertical flickering bar
`
Use “Frequency” to make an adjustment. Refer to the “VIDEO/AUDIO |
Computer Mode” section for more information.
`
Check and reconfigure the display mode of your graphic card to make it
compatible with the product.
Image is out of focus
`
Make sure the lens cap is removed.
`
Adjust the “Focus Ring” on the projector lens.
`
Make sure the projection screen is within the required distance of 4.1-16.4
feet (1.3-5.0 meters) from the projector.
The image is stretched when displaying 16:9 DVD title
When you play anamorphic DVD or 16:9 DVD, the projector will show the best
image in 16: 9 format on projector side.
`
If you play 4:3 format DVD title, please change the format as 4:3 in projector
OSD.
`
If the image is still stretched, you will also need to setup the display format
as 16:9 (wide) aspect ratio type on your DVD player.
Image is too small or too large
`
Move the projector closer to or further from the screen.
`
Press “Menu” on the control panel. Go to “SETTING” --> “Aspect Ratio”and
try the different settings.
Image has slanted sides:
`
If possible, reposition the projector so that it is centered on the screen and
below the bottom of the screen.
`
Use “SETTING” --> “V Keystone” from the OSD to make an adjustment.
Image is reversed
`
Adjust the “Projection” to correct it. Refer to the “SETTING” section for more
information.