ViewSonic SD-Z225 SD-Z225 User Guide M Region (English) - Page 11

Wall Mounting (Optional) NOTE: For use only with UL Listed Wall Mount Bracket. To obtain a wall-mounting kit or height adjustment base, contact ViewSonic® or your local dealer. Refer to the instructions that come with the base mounting kit. To convert your Zero Client Monitor from a desk-mounted to a wall-mounted display, do the following: 1. Verify that the power button is turned Off, then disconnect the power cord. 2. Lay the Zero Client Monitor face down on a towel or blanket. 3. Remove the base. (Screws removal might be required.) 4. Find and identify one of the following VESA mount interfaces (a,b,c) located on the back of your display (refer to "Specifications" page for your displays mounting interface). Attach the mounting bracket from the VESA compatible wall mounting kit using screws of the appropriate length. a. b. c. 75mm 100mm 200mm 100mm 75mm 100mm 100mm 5. Attach the Zero Client Monitor to the wall, following the instructions in the wallmounting kit. 5