ViewSonic VG750 Service Manual - Page 30
Function, Alignment, Procedure
UPC - 766907539325
View all ViewSonic VG750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
6-5 Function Test and Alignment Procedure 6-5.1 All Mode Reset Input signal to VG700, turn off the power of VG700. Press "A ", "y" and "Power on" buttons on the select knob simultaneouslyfor 3-5 seconds, release "Power on" button first, then else buttons. The screen will show "All Mode Reset". This action will allow you to erase all end-user's settings and restore the factory defaults. 6-5.2 Auto Image Adjust Please select and enter "Auto Image Adjust"function on OSD "E" Main Menu or press button directly. The "Auto Image Adjust" function is aimed to offer a better screen quality by built-in ASIC. For optimum screen quality, the user has to adjust each function manually %ea 6-5.3 Fine Tune (D Test Signal: 1280 *1024@75Hz Test Pattern: Line Moire Pattern • Check and see if the image has noise andfocus is well performed. • If not, readjust by the following steps: a.) Select and enter "Manual Image Adjust"function on OSD Main Menu. b.) Then, select and enter "Fine Tune"function to adjust the image to eliminate visual noise. 6-5.4 Boundary Test Signal: 1280*1024@75Hz Test Pattern: Horizontal & Vertical Line Thickness Pattern • Check and see if the image boundary is within the screen frame. • If not, readjust by the following steps: a.) Select and enter "Manual Image Adjust"function on OSD Main Menu. b.) Then, select and enter "Horizontal/Vertical Position" or "ScalingIFit All"function to adjust the video Boundary to be full scanned and within screen frame. 6-5 ViewSonic Corporation CONFIDENTIAL - DO NOT COPY