ViewSonic VS2247-MH - 22 1080p 75Hz Monitor with Adaptive Sync HDMI and VGA Us - Page 5

W x H, Interface Pad, W x H x D, Pad Hole

Get ViewSonic VS2247-MH - 22 1080p 75Hz Monitor with Adaptive Sync HDMI and VGA PDF manuals and user guides View all ViewSonic VS2247-MH - 22 1080p 75Hz Monitor with Adaptive Sync HDMI and VGA manuals
Add to My Manuals
Save this manual to your list of manuals

Page 5 highlights

• Fastening the display to a wall or fixed object using cordage or other restraining devices can help support the weight of the display in order to prevent the display from falling over. Hole pattern (W x H) 100 x 100 mm Interface Pad (W x H x D) 115 x 115 x 2.6 mm Pad Hole Screw Specification & Quantity Ø 5 mm M4 x 10 mm 4 pieces or VESA wall mounƟng hole NOTE: • Restraining device/cordage should be able to withstand 100N force. • Make sure the cordage is straightened, and any slack is removed. The back of the device shall face the wall to ensure the device cannot tilt under external force. • Make sure the display does not tilt under external force at any height and rotation angle of the device. • If the existing display is going to be retained and relocated, the same considerations as above should be applied. 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
5
•
Fastening the display to a wall or fixed object using cordage or other restraining
devices can help support the weight of the display in order to prevent the
display from falling over.
Hole pa±ern
(W x H)
Interface Pad
(W x H x D)
Pad Hole
Screw Specifica°on & Quan°ty
100 x 100 mm
115 x 115 x 2.6 mm
Ø 5 mm
M4 x 10 mm
4 pieces
VESA wall moun°ng hole
NOTE:
•
Restraining device/cordage should be able to withstand 100N force.
•
Make sure the cordage is straightened, and any slack is removed. The back
of the device shall face the wall to ensure the device cannot tilt under
external force.
•
Make sure the display does not tilt under external force at any height and
rotation angle of the device.
•
If the existing display is going to be retained and relocated, the same
considerations as above should be applied.