Viking 12%20Inch%20H.%20Wall%20Hood Installation Instructions - Page 19

Installation (VCIH Island Hoods) 1 2 Check framing where cutout will be. NOTE: 200 lb. limit. Mounting options: Using duct cover with ceiling mounting bracket. (Option A - VCIH only) Using threaded rod for additional support. (Option B) Attaching hood directly to soffit or duct cover. (Skip to step 3) Cut appropriate size hole in ceiling. Either 7" or 10" depending on your specific unit and ventillator kit. A1 A2 Attach duct cover to optional ceiling mounting bracket. B1 5/16" nut driver Attach duct cover to ceiling. The ceiling bracket can be hidden by using a locally supplied trim. Additional support option. Drill holes in all four corners for threaded rod and run rods from hood to ceiling. 36 Installation (VCIH Island Hoods) 3 4 5/16" nut driver Run duct work down to bottom edge of duct cover/soffit and secure in place. Make sure the duct does not stick down past the cover. 5 1 Attach canopy to duct cover/soffit. Seal top of hood to duct with aluminum tape. 6 1 1 3 2 Slide filter front over front lip. Push filter rear up, then slide back over rear lip. 3 2 Slide filter front over front lip. Push filter rear up, then slide back over rear lip. To install ventillation kit refer to ventillation kit installation instructions. 37