Viking 24" Undercounter Wine Cellar Installation / Use and Care Instructions - Page 6
Door Reversal
View all Viking 24" Undercounter Wine Cellar manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
DOOR REVERSAL Door Reversing Instructions 1. Open door. 2. Loosen screw #1 and #2 using a Philips Screwdriver on top and bottom hinge. Slide door and remove the door from the unit. Figure 7 3. Once door is removed, using a Philips Screwdriver remove screws from magnet actuator located on inside and bottom of door. (On Integrated Models magnet actuator will be located on bottom of door. Figure 8 Figure 9 4. Remove caps from top of door. Using a Philips Screwdriver, install magnet actuator on opposite side. Install caps into opposite side. 5. Remove caps from screw holes on opposite side (2 on top and bottom). Using a Philips Screwdriver remove the 4 screws that you previously loosened. 6. Reinstall screws and caps on opposite side. 7. Once screws are partially installed, rotate the door 180°, align the hinge over screw #1 and slide into position. Tighten screws on top and bottom. 8. Door is now reversed. 6