Viking VBCV42381 Use and Care Manual - Page 5

Product Controls/Operation Settings and Functions Hood Operation Always turn on your hood before you begin cooking to establish airflow in the kitchen. Also let the blower run for a few minutes to clear the air after you turn off your cooking appliance. This will help keep the kitchen air cleaner. Professional Hoods ON/OFF switch-Starts and stops the blower. When turned on the blower will operate at the previous setting of the speed control. Blower speed knob-Turn the knob counterclockwise to decrease the blower speed and clockwise to increase speed. The type of cooking you are doing will dictate the speed of the blower you use. Light switch-Controls the 50-watt halogen lights located in the front of the hood. Dimmer knob-Turn the knob clockwise to brighten the halogen lights and counterclockwise to dim the lights. Heat lamp switches-Turn the heat lamps on and off. Each professional wall hood will be equipped with one or two heat lamp outlets. The 250-watt infrared bulbs are not included and should be purchased locally. CAUTION DO NOT place flammable material on warming shelves when using heat lamps. 8 Settings and Functions Designer Hoods Light knob-Push once to turn lights on. Push again to turn lights off. Rotate clockwise to increase light intensity and counterclockwise to decrease light intensity. Light setting will stay the same when turned on or off. Fan knob-Push once to turn blower on. Push again to turn blower off. Rotate clockwise to increase blower speed and counterclockwise to decrease blower speed. Digital display-Remains blank while timer/delay functions are not in use. Displays desired set time which is set by either the set button or delay function button. Upon reaching 00:00, the buzzer will sound and will continue to beep every 10 seconds up to 5 minutes. Delay feature button-Pushing this button once will automatically set the digital display to 10 minutes. Pushing again will go to 20 minutes and so forth, up to 30 minutes. The blower will activate and the timer will start counting down until 00:00 is reached. At this time the display will go blank and blower will cut off. Scroll up button-Changes timer display upward to 12 hours. Scroll down button-Changes timer display downward to 00:00. Set button-Pushing once will activate display (00:00) and allow you to enter time using the scroll up or scroll down buttons. The blower cannot be activated using the set button. Only the timer will be activated. Upon reaching 00:00, the buzzer will sound and will continue to beep every 10 seconds up to 5 minutes. 9 Product Controls/Operation