Viking VCWH Installation Instructions - Page 28
Warning
View all Viking VCWH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Installation (VWH/CVWH 10"H./12"H. Wall Hoods w/Standard Ventilator) 1 2 Check damper for unrestricted movement, adjust if necessary. 3 Flip hood over and remove electrical box cover. 4 2 1 Attach transition to damper. Seal with aluminum tape. WARNING To reduce the risk of fire, electric shock, or injury to persons, observe the following: • Use this unit only in the manner intended by the manufacturer. If you have any questions, contact the manufacturer. • Before servicing or cleaning unit, switch power off at service panel and lock service panel to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel. 5 1 Insert 6" of electrical wiring through the top of vent hood and secure using wiring restrain. Refer to local codes. 28 Slide duct over transition and tape around joint.