Viking VIPR161SS Specs - Page 4

VENTILATION, Installation Requirements

Page 4 highlights

Installation Requirements VENTILATION Built-In VersaVent™ Rear Downdraft VIPR Professional Downdraft DUCTING • Check with a qualified and trained installer or local codes for makeup air requirements, if any. • Max. duct run length (see Installation Notes & Accessories) • For best performance, use the shortest length of ductwork and a minimum number of elbows. • The system will operate most efficiently when the ductwork does not exceed 40' of equivalent duct. For longer duct runs, increase duct size and contact a qualified and trained installer. • Straight runs and gradual turns are best; for example, each 90° elbow is equivalent to 5' - 10' (152.4 - 304.8 cm) of straight run. VIPR Professional Downdraft w/Remote UTILITY REQUIREMENTS o 6" or 10" round elbow= 6' of straight duct o 3-1/4" x 10" to 6" round transition= 2' of straight duct o 3-1/4" x 10" 90° elbow= 8' of straight duct • Never use flexible duct; it creates back pressure/air turbulence and greatly reduces performance. GAS • Not applicable ELECTRICAL • 2'-long power cord with 3- pronged plug included • Internal blowers require a grounded outlet within reach of the power cord • External blowers require direct DIPR Designer Downdraft w/Remote hardwiring with 2-wire with ground, using locally-supplied wire, and connected to the downdraft plug (included) • 120 VAC/60 Hz • Max. amp usage (rating does not include recommended ventilator kit rating-See Installation Notes & Accessories) PLUMBING • Not applicable Model VIPR102 VIPR162 VIPR182 VIPR102R VIPR162R VIPR182R DIPR101R DIPR161R DIPR151R Ventilator Kits Interior Exterior VIDV500 VEDV900 VIDV500 VEDV900 VIDV500 VEDV900/1200 VIDV500 VEDV900 VIDV500 VEDV900 VIDV500 VEDV900/1200 VIDV500 VEDV900 VIDV500 VEDV900 VIDV500 VEDV900 Duct Size Interior Exterior 3-1/4" x 10" (8.3 x 25.4 cm) 10" (25.4 cm) 3-1/4" x 10" (8.3 x 25.4 cm) 10" (25.4 cm) 3-1/4" x 10" (8.3 x 25.4 cm) 10" (25.4 cm) 3-1/4" x 10" (8.3 x 25.4 cm) 10" (25.4 cm) 3-1/4" x 10" (8.3 x 25.4 cm) 10" (25.4 cm) 3-1/4" x 10" (8.3 x 25.4 cm) 10" (25.4 cm) 3-1/4" x 10" (8.3 x 25.4 cm) 10" (25.4 cm) 3-1/4" x 10" (8.3 x 25.4 cm) 10" (25.4 cm) 3-1/4" x 10" (8.3 x 25.4 cm) 10" (25.4 cm) Max. Amps Interior Exterior 4.0 5.7 4.0 5.7 4.0 5.7/3.0 4.0 5.7 4.0 5.7 4.0 5.7/3.0 4.0 5.7 4.0 5.7 4.0 5.7 Note: Proper installation/ ducting is extremely important to ensure maximum performance. Use a qualified and trained installer. PLANNING AND DESIGN GUIDE VIKINGRANGE.COM • 1-888-VIKING1 REVISED 5/2/11 © 2 0 1 1 V R C - INFORMATION SUBJECT TO CHANGE

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7

VIPR Professional
Downdraft
VIPR Professional
Downdraft w/Remote
DIPR Designer
Downdraft w/Remote
PLANNING AND DESIGN GUIDE
VIKINGRANGE.COM
1-888-VIKING1
REVISED 5/2/11
© 2 0 1 1 V R C — INFORMATION SUBJECT TO CHANGE
VENTILATION
Built-In VersaVent™ Rear Downdraft
DUCTING
• Check with a qualified and
trained installer or local codes
for makeup air requirements,
if any.
• Max. duct run length (see
Installation Notes &
Accessories
)
• For best performance, use the
shortest length of ductwork
and a minimum number of
elbows.
• The system will operate most
efficiently when the ductwork
does not exceed 40’ of
equivalent duct. For longer
duct runs, increase duct size
and contact a qualified and
trained installer.
• Straight runs and gradual
turns are best; for example,
each 90° elbow is equivalent
to 5’ – 10’ (152.4 – 304.8 cm)
of straight run.
o
6” or 10” round elbow= 6’
of straight duct
o
3-1/4” x 10” to 6” round
transition= 2’ of straight
duct
o
3-1/4” x 10” 90° elbow= 8’
of straight duct
• Never use flexible duct; it
creates back pressure/air
turbulence and greatly
reduces performance.
GAS
• Not applicable
ELECTRICAL
• 2’-long power cord with 3-
pronged plug included
• Internal blowers require a
grounded outlet within reach
of the power cord
• External blowers require direct
hardwiring with 2-wire with
ground, using locally-supplied
wire, and connected to the
downdraft plug (included)
• 120 VAC/60 Hz
• Max. amp usage (rating does
not include recommended
ventilator kit rating—See
Installation Notes &
Accessories)
PLUMBING
• Not applicable
Installation Requirements
UTILITY REQUIREMENTS
Model
Ventilator Kits
Duct Size
Max. Amps
Interior
Exterior
Interior
Exterior
Interior
Exterior
VIPR102
VIDV500
VEDV900
3–1/4” x 10” (8.3 x 25.4 cm)
10” (25.4 cm)
4.0
5.7
VIPR162
VIDV500
VEDV900
3–1/4” x 10” (8.3 x 25.4 cm)
10” (25.4 cm)
4.0
5.7
VIPR182
VIDV500
VEDV900/1200
3–1/4” x 10” (8.3 x 25.4 cm)
10” (25.4 cm)
4.0
5.7/3.0
VIPR102R
VIDV500
VEDV900
3–1/4” x 10” (8.3 x 25.4 cm)
10” (25.4 cm)
4.0
5.7
VIPR162R
VIDV500
VEDV900
3–1/4” x 10” (8.3 x 25.4 cm)
10” (25.4 cm)
4.0
5.7
VIPR182R
VIDV500
VEDV900/1200
3–1/4” x 10” (8.3 x 25.4 cm)
10” (25.4 cm)
4.0
5.7/3.0
DIPR101R
VIDV500
VEDV900
3–1/4” x 10” (8.3 x 25.4 cm)
10” (25.4 cm)
4.0
5.7
DIPR161R
VIDV500
VEDV900
3–1/4” x 10” (8.3 x 25.4 cm)
10” (25.4 cm)
4.0
5.7
DIPR151R
VIDV500
VEDV900
3–1/4” x 10” (8.3 x 25.4 cm)
10” (25.4 cm)
4.0
5.7
Note:
Proper installation/ ducting is extremely important to ensure maximum performance. Use a qualified and trained installer.