Viking VWH4878TSS Outdoor Kitchen Planning Guide - Page 26

PLANNING YOUR VIKING OUTDOOR KITCHEN C O U N T E RTO P S I Z I N G G U I D E L I N E S F O R WA L L I N STA L L AT I O N S While it is always recommended that field templates be used to exactly determine countertop sizes on outdoor cabinet layouts, the dimensions above, and following rules will be helpful in planning and costing countertop installations: 1. Depth of counter, with a 3¼4" nominal overhang, will be 34 3¼4" when 4" fillers (VFLR4) are used against house walls. The depth will be 30 3¼4" when no fillers are used. Note: Fillers must be used if a grill is installed in the cabinet run. 2. Notches in the countertop front edge (1¼2" x 11¼2") are required at all grill, side burner, and wok burner cutouts. 3. Total width of countertop modules is determined by adding up the width of each cabinet and filler, in the run, and adding 3¼4" for each end overhang, and 3/4" for each back panel (if a 90º layout has exposed (island) backs. No dimension should be added for side panels (VSP30), as they fit flush into the cabinet end. 4. Countertop thickness should be 11¼4". Any thicker countertop will require that grills, wok burners and side burners be shimmed (shims locally supplied), to install flush with the tops. 26