Viper 5501 Owner Manual - Page 42

Using the 1 way companion remote The companion 1 way remote commands the system features as shown in the previous table, but without the message display of the Responder LC remote. Horn honks and parking light flashes are used to indicate that a command has been received and activated as described in the Basic and Advanced command sections. Accessing Commands Similar to the Responder LC remote, Basic commands are performed when a command button isAUXpressed directly. To perform Advanced CommandAUsX press the button 1 to 4 times to access fuAnUXction levels, x4 in the table for example implies pressing 4 times. The LED flashes in groups for a few seconds to indicate the level. Press the desired command button while the LED is flashing to perform the command. Button Auto Lock When On, the remote control buttons lock if more than 20 seconds lapses between button presses. If a button is pressed whAeUXn locked, a fault tone is emitted. To unlock the buttons; press the button followed by the button, the buttons unlock and tones play to confirm. AUX Car Select AUX Car 2 must first be turned On (See Remote Features menu undAUeX r Pro- gramming section below to turn on). Press and hold the button for 3 seconds. The remote flashes the LED and beeps once or twice to indicate the selected Car is 1 or 2, release the button for Car Select or continue to hold forAUpX rogramming. Release the button, then press and release while the LED and beeps continue to perform Car Select. Once the car is selected a com- mand can be performed by pressing one of the command buttons. 40 © 2009 Directed Electronics. All rights reserved.