Viper Responder 350 Owner Manual - Page 40
operates. If NPC - install manual
View all Viper Responder 350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
feature by turning the ignition key to the RUN position and pressing the Valet® button the programmed number of times. AED is disabled when the system is in Valet® Mode. note: This feature will only function if the Failsafe® Starter Kill relay has been installed. ➤ Full trigger response 30 or 60 seconds: This determines how long the full triggered sequence lasts. Some states have laws regulating how long a security system can sound before it is considered a nuisance. If your installer is programming the security system with the Directed Bitwriter, the full triggered response can be programmed for any duration ranging from 1 to 180 seconds. ➤ Nuisance Prevention® Circuitry on or off: Please refer to the NPC® section of this manual for a complete explanation of how NPC® operates. If NPC® is programmed off, the security system will respond to inputs from any sensor indefinitely. note: Because many states have laws regulating security systems, programming NPC® off may cause your system to violate state laws. ➤ Progressive door trigger on or off: When the system is armed and a door is opened, the system responds with ten chirps prior to beginning the full triggered sequence. If an instant trigger is desired, the progressive door trigger can be programmed off. © 2008 directed electronics 35