Viper Responder One Owner Manual - Page 12
Valet Take-Over - remote start not working
View all Viper Responder One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
➢ Valet Take-Over The Valet Take-Over feature allows the vehicle to remain running after the key has been removed from the ignition. This feature is useful for occasions when you wish to exit and lock the vehicle for short periods of time, but would like to leave the motor running and the climate controls on. To perform Valet Take-Over: 1. Before turning off the engine, press and release the single button once. The remote responds with the remote start ON tones and the green LED on the remote flashes once. The vehicles parking lights turn on constant to confirm remote start operation. 2. Turn the ignition key to the OFF position. (The engine stays running.) 3. The engine runs until pre-programmed time elapses or a shut-down input is received. (See the previous Remote Start section for a complete list of shut-down inputs.) Note: This feature does not work if the brake pedal is being pressed. 12 © 2008 Directed Electronics. All rights reserved.