Vivitar DVR 914HD User Manual

Vivitar DVR 914HD Manual

Get Vivitar DVR 914HD PDF manuals and user guides View all Vivitar DVR 914HD manuals
Add to My Manuals
Save this manual to your list of manuals

Vivitar DVR 914HD manual content summary:

  • Vivitar DVR 914HD | User Manual - Page 1
    DVR 914HD WiFi Action Camcorder User Manual © 2009-2015 Sakar International, Inc. All rights reserved. Windows and the Windows logo are registered trademarks of Microsoft Corporation. All other trademarks are the property of their respective companies.
  • Vivitar DVR 914HD | User Manual - Page 2
    ...40 Remote Control ...48 Camcorder Technical Specifications 49 Vivitar Action Cam - Mobile Device Application 50 Computer System Requirements 69 Manually from the Camcorder to the Computer 73 Camcorder Maintenance ...75 Sakar Warranty Card...77 Technical Support...78 Troubleshooting...78
  • Vivitar DVR 914HD | User Manual - Page 3
    Introduction Thank you for purchasing the Vivitar DVR 914HD Full HD Wi-Fi Action Camcorder. Everything you need to take high definition digital videos and photos is included with your camcorder. This unique, ultraportable camera design is adapted specifically for this camera and can be used to
  • Vivitar DVR 914HD | User Manual - Page 4
    What's Included 1. Wi-Fi Action Camcorder 2. USB Cable 3. AC Adapter 4. Vivitar Experience Installation CD 5. Waterproof Casing NOTE: Micro SD Card not included. 6. Remote Control 7. Bicycle Mount 8. Helmet Mount & Strap 9. Lithium Battery 10.Camera Shield 3
  • Vivitar DVR 914HD | User Manual - Page 5
    LED Indicator 2. Power / Mode Button 3. 2.0 Inch HD LCD Display 4. Shutter / OK Button 5. Menu / Display Button 6. Wi-Fi Button / Down Button 7. Microphone 8. Battery Cover 9. Infrared Signal Reception Light 10. Charging / Busy LED Indicator 11. Speaker 12. Micro SD Card Slot 13. Mini HDMI Port 14
  • Vivitar DVR 914HD | User Manual - Page 6
    AND CHARGING THE BATTERY To insert the lithium battery: 1. If the camera is inside the waterproof casing, please take it out of the casing. 2. Push and hold the battery cover lever up to the unlock/open position, until it flips open. 3. Insert the battery into the battery compartment as shown
  • Vivitar DVR 914HD | User Manual - Page 7
    : 3. During the time the camcorder is charging, the LED status indicator light (blue) is on. When the battery is fully charged the LED status indicator light turns off. The battery generally fully charges within 2-4 hours. NOTE:  While the device is charging it cannot be used to capture images
  • Vivitar DVR 914HD | User Manual - Page 8
    level is completely exhausted and the camcorder automatically turns off after a few seconds. Please fully recharge the battery. NOTE: When the battery capacity drops to a low level, the battery icon will flash on the display, indicating that the camcorder requires to be recharged. Please charge the
  • Vivitar DVR 914HD | User Manual - Page 9
    Installing the Memory Card: To properly insert the Micro SD Card, follow the instructions below: 1. Power off the camcorder. 2. Insert the Micro SD Card into the Micro SD Card slot in the direction as shown above. 3. Gently press the
  • Vivitar DVR 914HD | User Manual - Page 10
    . Energy Save: Your camcorder also has an auto power off feature that will automatically turn off your camcorder after a specific period of time that your camera is left idle. The auto power off settings can be set from the Power Save settings menu. USING THE CAMCORDER Press the Shutter/OK button
  • Vivitar DVR 914HD | User Manual - Page 11
    Main Camcorder Modes Short press the Power/Mode button to toggle between the camcorder modes. Video Capture Mode Use this mode to capture videos with your digital camcorder. To record a video, please check that the DV is in Video mode. If the video icon is not displayed on the LCD screen, press the
  • Vivitar DVR 914HD | User Manual - Page 12
    turning on your camcorder and connecting it to an HDTV via an HDMI cable (purchased separately), it enters Playback Mode. Mobile Device: After downloading the Vivitar Action Cam app to your mobile device and connecting it via Wi-Fi to your camera, tap the Playback icon to view your photos. 11
  • Vivitar DVR 914HD | User Manual - Page 13
    Shutter Release 2. Clamp (Securing Latch) 3. Power/Mode Button 4. Wi-Fi Button Your action cam comes with a waterproof casing for underwater action and added durability. To assemble your camera to the case, follow the instructions below: 1. To open the case: Insert a finger at the half circle of the
  • Vivitar DVR 914HD | User Manual - Page 14
    and capturing your photos. NOTE:  A single hair or grain of sand can cause a leak. You can test by closing the case without inserting the camera. Submerse the case completely in water for about a minute. Remove the case from the water, dry off its exterior with a towel, and then open the
  • Vivitar DVR 914HD | User Manual - Page 15
    SYSTEM Powering On Your Camcorder 1. Press and hold the POWER button for about 3 seconds to turn on the camcorder. The LCD screen briefly displays the 'Vivitar' screen and opens to the Video Capture Mode. 2. Press and hold the POWER button again for about 3 seconds to turn the power off. The LCD
  • Vivitar DVR 914HD | User Manual - Page 16
    Changing Camcorder Mode CAMCORDER MODES 1. Video Capture Mode (standard) - Use this mode to capture videos with your camcorder. 2. Video Capture Mode (Car Carrying) - Use this mode to capture videos in motion with your camcorder. 3. Photo Capture Mode - Use this mode to capture photos with your
  • Vivitar DVR 914HD | User Manual - Page 17
    to open the Main Menus for the current mode. 2. Press the  DOWN (WIFI) button to select a specific menu. The selected option appears highlighted. 3. Press you have selected. 4. To select a specific option, press the  DOWN (WIFI) button to select an option and then the SHUTTER/OK button to save the
  • Vivitar DVR 914HD | User Manual - Page 18
    you have selected. 5. To select a specific option, press the  DOWN (WIFI) button to select an option and then the SHUTTER/OK button to save setting, the setting is saved by your camera until you manually change the setting or restore the camera's default factory settings.  After selecting your
  • Vivitar DVR 914HD | User Manual - Page 19
    SHUTTER/OK button to view the Movie Size options. Press the  DOWN (WIFI) button to select an option and then press the SHUTTER/OK button to - 1080P (30fps)  720P - 720P (120fps)  720P - 720P (60fps)  4K - 4K (10fps) 3. Capturing the Video:  START: Press the SHUTTER/OK button to start the video
  • Vivitar DVR 914HD | User Manual - Page 20
    screen.  If the memory card is full or the battery level is low, the camera will automatically stop recording the video  When using the Waterproof current mode menu and the camcorder setting menus.  WIFI: Connects or disconnects camera to WiFi.  NAVIGATES MENU: Down button used to navigate
  • Vivitar DVR 914HD | User Manual - Page 21
    on the LCD screen and indicate the selected menu options and camera status. Item Function 1 Mode Selection Frames Per Second 2 Movie 1440P (30fps), 1080P (60fps), 1080P (30fps), 720P (120fp), 720P (60fps), 4K (10fps)  Standby Mode: Video Counter Displays the amount of time available for video
  • Vivitar DVR 914HD | User Manual - Page 22
    while recording is in progress. Displays the current status of the battery level. The battery level is full. The battery level is empty. Indication to recharge the battery. 'Low battery' will flash on the LCD screen when the battery level is low. Slow Motion Indicator (icon displays only when Slow
  • Vivitar DVR 914HD | User Manual - Page 23
    While capturing a video you can pause the recording and then resume recording (except for 4K Movie Size).  PAUSE RECORDING ICONS: The following icon appears at the bottom of the LCD while recording: Press the DOWN (WIFI) button to pause the video capture. While the video is paused, the record icon
  • Vivitar DVR 914HD | User Manual - Page 24
    SHUTTER/OK button to view the Movie Size options. Press the  DOWN (WIFI) button to select an option and then press the SHUTTER/OK button to 1080P (30fps)  720P - 720P (120fps)  720P - 720P (60fps)  4K - 4K (10fps) 3. Capturing the Video:  START: Press the SHUTTER/OK button to start the video
  • Vivitar DVR 914HD | User Manual - Page 25
    icon that indicates the recording is in progress.  PAUSE: Press the DOWN (WIFI) button to pause the recording.  STOP: Press the SHUTTER/OK button again LCD screen.  If the memory card is full or the battery level is low, the camera will automatically stop recording the video.  When using the
  • Vivitar DVR 914HD | User Manual - Page 26
    Mode, Car Carrying Mode, Photo Capture Mode and Playback Mode. - Menu Mode: Toggles between the current mode menu and the camcorder setting menus.  WIFI: Connects or disconnects camera to Wifi.  NAVIGATES MENU: Down button used to navigate within the Menus, toggling between the menu options. 25
  • Vivitar DVR 914HD | User Manual - Page 27
    on the LCD screen and indicate the selected menu options and camera status. Item Function 1 Mode Selection 2 Frames Per Second 3 : 1440P (30fps), 1080P (60fps), 1080P (30fps), 720P (120fp), 720P (60fps), 4K (10fps)  Standby Mode: Video Counter Displays the amount of time available for video
  • Vivitar DVR 914HD | User Manual - Page 28
    the battery level is low. PAUSE RECORDING / RESUME RECORDING SCREEN ICONS: While capturing a video you can pause the recording and then resume recording (except for 4K Movie Size).  PAUSE RECORDING ICONS: The following icon appears at the bottom of the LCD while recording: Press the DOWN (Wifi
  • Vivitar DVR 914HD | User Manual - Page 29
    ) button to select 'Resolution'. Next, press the SHUTTER/OK button to view the Resolution options. Press the  UP (WIFI) button to select an option and then press the SHUTTER/OK button to confirm the option. The Resolution options include: 16M (4640x3480) 12M (4000x3000) 8M (
  • Vivitar DVR 914HD | User Manual - Page 30
    Mode, Car Carrying Mode, Photo Capture Mode and Playback Mode. - Menu Mode: Toggles between the current mode menu and the camcorder setting menus.  WIFI: Connects or disconnects camera to Wifi.  NAVIGATES MENU: Down button used to navigate within the Menus, toggling between the menu options. 29
  • Vivitar DVR 914HD | User Manual - Page 31
    CAPTURE MODE LCD ICON STATUS DESCRIPTION The following icons appear on the LCD screen and indicate the selected menu options and camera status. Item Function 1 Mode Selection 2 Photo Burst / Timer Description Displays the current selected Mode: Photo Capture Mode Displays the selected Timer
  • Vivitar DVR 914HD | User Manual - Page 32
    resolution and memory card size. Displays the current status of the battery level. The battery level is full. The battery level is empty. Indication to recharge the battery. 'Low battery' will flash on the LCD screen when the battery level is low NOTE:  Some icons appear only when the selected
  • Vivitar DVR 914HD | User Manual - Page 33
    review, protect and delete photos and videos that you've captured with you camcorder. To enter Playback Mode, power on your camcorder and then short press the POWER/MODE button until the camera type of image to view: 1. Press the  DOWN (WIFI) button to scroll and select between: - CAR (Car Carrying
  • Vivitar DVR 914HD | User Manual - Page 34
    number of files, the date, the time and the file size.  OPEN/EXIT MENU: Opens and exits the menu options for Playback Mode and General Camera Settings. MENU NOTE: Use the DOWN button to navigate within the menu options.  VIDEO PLAYBACK- CAR and VIDEO - STOP: Stops a playing video and returns
  • Vivitar DVR 914HD | User Manual - Page 35
    with the video list of files.  PHOTO PLAYBACK: From the image of the photo, returns to the Main Playback Menu.  WIFI: Connects or disconnects camera to Wifi.  NAVIGATES MENU: Down button used to navigate within the Menus, toggling between the menu options.  PHOTO PLAYBACK: Scrolls between the
  • Vivitar DVR 914HD | User Manual - Page 36
    the video. STOP: Press the MENU button to stop the playing video and return to the list of video files. After the video plays the camera returns to the screen with the list of video files. SEAMLESS VIDEO PLAYBACK You can view your saved videos consecutively using the seamless video playback
  • Vivitar DVR 914HD | User Manual - Page 37
    video files) Indicates serial number of the current file / total number of files Lists the captured files as per the file name. Press the DOWN/WIFI button to scroll between the files. Indicates that you can press the SHUTTER / OK button to play the selected video file. The lock icon indicates
  • Vivitar DVR 914HD | User Manual - Page 38
    return to the list of video files. After the video stops playing, the camera returns to the Video File List screen. VIEWING PHOTOS ON YOUR CAMCORDER To until the camcorder displays the Playback Mode. 2. Use the  DOWN (WIFI) button to select PHOTO from the Playback Main Menu and then press SHUTTER
  • Vivitar DVR 914HD | User Manual - Page 39
    - To display the date, time and file size press the SHUTTER/OK button. - To hide the display of the file number, time, date and file size press the SHUTTER/OK button again. - Then, press the SHUTTER/OK button once again to display the file number.  RETURN TO PLAYBACK MAIN MENU: Press the POWER/MODE
  • Vivitar DVR 914HD | User Manual - Page 40
    selected) or all files (if All was selected). - No: This option returns to the previous 'Delete' menu screen without deleting the image(s). Use the  DOWN (WIFI) button to select an option and then press the SHUTTER/OK button to confirm. 7. To exit and return to the Playback menu screen, select 'No
  • Vivitar DVR 914HD | User Manual - Page 41
    the 'Navigating the Menus' section for instructions how to access the Mode Menus and the General Camera Settings Menus. VIDEO CAPTURE MODE MENUS image distortion ON that can be caused by movement of the camera while capturing the image. 4K (10fps) OFF - Image Stabilizer not active. ON - Image
  • Vivitar DVR 914HD | User Manual - Page 42
    12M pixel resolution 8M pixel resolution (Default) 5M pixel resolution Timer The Self Timer menu allows you to set a delay between the time that the camera's Shutter button is pressed and the actual capture of the picture. This is an optimal feature if you don't just want to take the picture
  • Vivitar DVR 914HD | User Manual - Page 43
    Photo Burst When enabled, the 'Burst Mode' feature allows you to take rapid snapshots in a row with a single click of the Shutter button. This feature can be effective when trying to capture a particular moment in a sporting event or other scenes with quick movements. OFF 10S - Set a 10-second
  • Vivitar DVR 914HD | User Manual - Page 44
    delete all images saved to the SD card. Single All IMPORTANT: Keep in mind that deleting will permanently remove the selected images on your camera's memory card. Protect All - Protects/locks all images (videos and photos) saved to the memory card. Unprotect All - Unlocks all images (videos and
  • Vivitar DVR 914HD | User Manual - Page 45
    Save' feature in order to conserve you camcorder's battery life. The designated time represents when your camcorder will the YY/MM/DD and Hour: Minutes: - Press the DOWN (WIFI) button to change each setting and specify the date and time. The camera's language English French 44 Selects the
  • Vivitar DVR 914HD | User Manual - Page 46
    20 min 30 min 60 min Date Stamp When you capture an image with your camera, the Date Stamp feature allows the image to include a date stamp or date and on and allows you to select the frames. Sets the amount of time the camera will record the video using the Time-lapse feature. Off - No date or
  • Vivitar DVR 914HD | User Manual - Page 47
    card will permanently delete all of the content on your camera's memory card. Please make sure you have backed up the images that you want before you proceed with the format of the memory card. Yes No password. Press the DOWN (WIFI) button to change each number. Press the POWER/MODE button
  • Vivitar DVR 914HD | User Manual - Page 48
    an HDTV with a HD cable as shown in the following figure, display signals in the camera will be output into the HDTV automatically, and you can browse HD videos and photos that are recorded or taken in the HDTV. HDMI cable
  • Vivitar DVR 914HD | User Manual - Page 49
    Remote Control You can use the remote control to record videos, take photos and power off your camcorder, without operating the camera. When using the remote control, aim the remote control's signal transmission port to the infrared signal reception light on the camcorder, and then press the
  • Vivitar DVR 914HD | User Manual - Page 50
    ) Continuous Shot Self-Timer Auto Power Off (Power Save) Language Interface System Requirements for Vivitar Experience Battery CMOS Sensor 1440P@30fps, 1080P@60fps, 1080P@30fps, 720P@120fps, 720P@60fps, 4K@10fps 16M (4640x3480), 12M (4000x3000), 8M (3264x2488), 5M (2592x1944) H.264 MOV (Video), JPG
  • Vivitar DVR 914HD | User Manual - Page 51
    . Android QR Code Apple iOS devices: Search for "Vivitar Action Cam" in the Apple App Store or scan the QR code printed on the gift box to find the application. iOS QR Code 2. Follow the instructions to install the "Vivitar Action Cam" application on your smartphone or tablet. When installation
  • Vivitar DVR 914HD | User Manual - Page 52
    YOUR ACTION CAM TO YOUR MOBILE DEVICE 1. Setting up the WiFi connection on your Action Camcorder: Make sure you have installed a TF card and power on your Action Camcorder. Power on your camcorder and then press the Wi-Fi button on the side of the camera to enable the WiFi connection. 'WiFi On
  • Vivitar DVR 914HD | User Manual - Page 53
    USING THE VIVITAR ACTION CAM APPLICATION HOME SCREEN The Vivitar Action Cam application gives you the option to connect three Vivitar Action Camcorders. Only one Action Cam can be connected at a time. The Home screen allows you to connect your camera(s) and enter the Video and Photo live capture
  • Vivitar DVR 914HD | User Manual - Page 54
    sure your Mobile device and your Vivitar Action Cam are connected. See CONNECTING YOUR ACTION CAM TO YOUR MOBILE DEVICE for more information. Tap Add New Camera to connect to the camera to the app. , you are now able to control the camera with the Vivitar Action Cam app. Once connected, the selected
  • Vivitar DVR 914HD | User Manual - Page 55
    access the online Help or User Manual, please must make sure you are connected to a WiFi network with an Internet connection. If you are not connected to the Internet via mobile data, then please disconnect from the camera's WiFi setting and select the WiFi network with an Internet connection. Only
  • Vivitar DVR 914HD | User Manual - Page 56
    / SETTING 1 BACK 2 RECORDING TIME DESCRIPTION & ICON Tap the Back icon to return to the Home screen. TIME LEFT: Displays the time left on your camera for capturing videos during standby mode. ELAPSED TIME: During the recording of your video in Regular or Slow Motion video record, the TIME LEFT
  • Vivitar DVR 914HD | User Manual - Page 57
    : Frequency, Date Stamp. Camera information, Change Camera password, Format storage, and Time-Lapse settings (Type, Interval, Duration). 7 CAMERA WI-FI INDICATOR Displays the camera's Wi-Fi signal status. 8 CAMERA BATTERY LEVEL Displays the battery level of the camera. 9 ZOOM CONTROL 56
  • Vivitar DVR 914HD | User Manual - Page 58
    Motion Video NOTE: 'REGULAR VIDEO', 'TIME-LAPSE' or 'SLOW MOTION' appear on the screen as per the selected setting. White Balance allows your camera to adjust the coloring of the captured images depending on the type of light source in the current environment. Properly adjusting the White Balance
  • Vivitar DVR 914HD | User Manual - Page 59
    to stop recording the video. Slide the mode indicator to the Video icon to switch to Video Capture Mode. The default mode when launching the Vivitar Action Cam app is Video Capture Mode. Slide the mode indicator to the Photo icon to switch to Photo Capture Mode. NOTE: The selected Mode is shown
  • Vivitar DVR 914HD | User Manual - Page 60
    is the Video Capture Mode. To change to Photo Capture Mode, slide the Switch Mode indicator to the Photo icon. The application is in Live Camera Mode and you can now begin capturing your images. NOTE: When you rotate your mobile device you can capture your photos in Portrait and Landscape
  • Vivitar DVR 914HD | User Manual - Page 61
    password, Format storage, and Time-Lapse settings (Type, Interval, Duration). 7 CAMERA WI-FI INDICATOR Displays the camera's Wi-Fi signal status. 8 CAMERA BATTERY LEVEL Displays the battery level of the camera. 9 ZOOM CONTROL 10 SELF TIMER SETTINGS Tap the preview screen to display the
  • Vivitar DVR 914HD | User Manual - Page 62
    BALANCE SETTINGS OFF (Default, one photo is taken) 3 photos 5 Photos 10 Photos Displays the current White Balance setting. White Balance allows your camera to adjust the coloring of the captured images depending on the type of light source in the current environment. Properly adjusting the White
  • Vivitar DVR 914HD | User Manual - Page 63
    Shutter button to take a picture. Slide the mode indicator to the Video icon to switch to Video Capture Mode. The default mode when launching the Vivitar Action Cam app is Video Capture Mode. Slide the mode indicator to the Photo icon to switch to Photo Capture Mode. NOTE: The selected Mode is shown
  • Vivitar DVR 914HD | User Manual - Page 64
    Settings icon to access your Action Camcorder settings. SETTING FREQUENCY DATE STAMP CAMERA INFORMATION CHANGE CAMERA PASSWORD FORMAT STORAGE TIME-LAPSE OPTIONS DESCRIPTION The 'Frequency' options represent the frequency of the electrical current in fluorescent lighting sources in your locale
  • Vivitar DVR 914HD | User Manual - Page 65
    that you captured using the Vivitar Action Cam application and the media you have previously captured using your camera can be viewed, deleted, downloaded or shared in Playback Mode. Tap the Playback icon in the Live Camera Mode to open the Media on 'My Camera' screen. PHOTOS Select the Photos
  • Vivitar DVR 914HD | User Manual - Page 66
    Alternatively, tap the Previous and screen. - DELETE (single image): Next buttons on the bottom of the Tap the Delete icon. Tap on the 'Delete' option to delete the photo or tap 'Cancel' to keep the photo. This delete option deletes one photo at a time. - SHARE/DOWNLOAD (single image): Tap the
  • Vivitar DVR 914HD | User Manual - Page 67
    - CANCEL: Tap 'Cancel' to return to the Thumbnail View - without selected images. VIDEOS Select the Videos tab to view the videos on your camera (Memory Card). Your captured videos are shown in Thumbnail view, with the latest captured video at the top. The videos can be downloaded to your
  • Vivitar DVR 914HD | User Manual - Page 68
    - DOWNLOAD (single or multiple images): Select the desired thumbnail image(s). Tap the Download icon. A window appears and displays the total number of files, the download time, and the total size of the download. Tap on the 'Confirm download' option to download the selected video(s) or tap '
  • Vivitar DVR 914HD | User Manual - Page 69
    PHOTOS Select the Photos tab to view the photos on your mobile device. 1. Thumbs View: Tap Thumbs to view thumbnails of the photos on your mobile device. 2. Albums View: Tap Albums, then tap on an Album to view thumbnails of the photos in the album. 3. View full screen: Tap on a photo in the
  • Vivitar DVR 914HD | User Manual - Page 70
    download videos and photos to your computer using the 'Vivitar Experience Image Manager' Software, you will need the following minimum configuration: WINDOWS OS  MICROSOFT® Windows XP with Service Pack 3, Windows Vista with Service Pack 1 or Windows 7  Pentium® 4 processor (or above)
  1 GB RAM
  • Vivitar DVR 914HD | User Manual - Page 71
    inserting the CD-ROM, connect to the internet and then click the "Install Vivitar Experience Image Manager" button to begin the installation. NOTE: If you do not How to transfer photos and videos from my camera to my computer" button for instructions. 5. If you have internet access, the "Choose your
  • Vivitar DVR 914HD | User Manual - Page 72
    your computer. On MACINTOSH OS: If needed, please follow instructions to install the Adobe® Flash® Player. This requires Internet connection. 12. On WINDOWS OS: Click the "Close" button when the installation is complete. Click the "Launch Vivitar Experience Image Manager" to open the application. On
  • Vivitar DVR 914HD | User Manual - Page 73
    the media files from the selected device (removable disk) after the import. 8. Click the "Get Media" button to transfer the videos from your camera to your computer. 9. A media download progress bar appears on the bottom left showing the number of media files downloading to your computer. A message
  • Vivitar DVR 914HD | User Manual - Page 74
    another  Organize your images by creating offline and online albums  Edit images using automatic and manual tools  Use automatic "Geotagging" with built in Google Maps For more details on how to use the Vivitar Experience Image Manager open the Help file or click the "Take a Tour" button on the
  • Vivitar DVR 914HD | User Manual - Page 75
    Reader to your iPad, then insert your digital camcorder's Micro SD Memory card into the slot to import photos and videos directly from your camera's SD card. NOTE: iPad SD Card Reader not included. This may be purchased separately. After you make the connection, your iPad automatically opens the
  • Vivitar DVR 914HD | User Manual - Page 76
    using a new memory card, or when there is unrecognized data for the camera or images with other cameras in the memory card, please make sure to firstly format the memory card fingers or metal materials. 8. The service life of the memory card has expired (please replace the memory card regularly). 75
  • Vivitar DVR 914HD | User Manual - Page 77
    dust and chemical materials. Place it in a cool, dry and well ventilated place. Do not place the video camera in a high temperature, moist or dusty place.  If dirt or stains accumulate on the video camera or on its lens, use a soft, clean and dry rag to wipe it away gently. If the
  • Vivitar DVR 914HD | User Manual - Page 78
    should include: 1. Copy of original bill of sale. 2. A detailed written description of the problem. 3. Your return address and telephone number (Daytime). MAIL TO ADDRESS BELOW: Sakar US Sakar International Attention: Service Department 195 Carter Drive Edison, NJ 08817 Sakar UK/Europe Attention
  • Vivitar DVR 914HD | User Manual - Page 79
    support in the US please call 1-800-592-9541, in the UK call 0800 917 4831, in Australia call 1800-006-614. If you would like to call from anywhere else, please visit www.vivitar.com for your local toll free number. Troubleshooting card for normal use. If the camera powers off nothing will happen to
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
DVR 914HD
WiFi Action Camcorder
User Manual
© 2009-2015 Sakar International, Inc. All rights reserved.
Windows and the Windows logo are registered trademarks of Microsoft Corporation.
All other trademarks are the property of their respective companies.