Vizio D40u-D1 User Manual English - Page 36

4 SETTING UP CHANNELS You can use the TV's Channels menu to: • Select a Channel Source • Find Channels • Perform a Partial Channel Scan • Manually Add Channels • Select channels to skip VIZIO CHANNELS Channels not searched Channel Source Find Channel Partial Channel Search Add Analog Channel Skip Channel Analog Audio Digital Language Cable Stereo English Selecting a Channel Source Select the type of tuner input you will be using. You can select either Antenna (Over-the-air) or Cable (Out-of-the-wall) connections. 1. From the CHANNELS menu, highlight Channel Source and press OK. The CHANNEL SOURCE menu displays. 2. WHidieghliZgohom t AntNeornmnala oParnoCraambicle and press OK. Press EXIT. Scanning for Channels The TV may need to scan for channels before it can display programs Exit 2D 3D and their associated information. A channel scan is required for free over-the-air channels (using an antenna) and cable channels from an out-of-theAB-Cwall connection (without a cable box). Moving the TV to an area with different channels requires the TV to scan for chaInnpnuet ls aWgiadien. CC To perform an Auto Channel Scan: VIZIO 1. From the CHANNELS menu, SThlim eiegeprhligPhicttuFreindACuhdioannels, and press OK. The auto channel scan begins. 2. NeWtwaoirtk uSnetttiilngths e cHhelapnnel scan is 100% complete. Highlight Done and press OK. VIZIO FIND CHANNELS Channels Found Digital: 0 Analog: 19 18% Complete Cancel 3. Press the EXIT button on the remote. If the channel scan is cancelled, the channels that were already discovered are retained. A new channel scan will clear all channels. Cancel the channel scan. Adding New Channels Occasionally, you may need to add a new range of channels or add a new analog channel. You can do this by using the Partial Channel Search and Add Analog Channel options. This is quicker than scanning all possible channels. To add a range of new channels: 1. From the CHANNELS menu, highlight Partial Channel Search, and press OK. The PARTIAL CHANNEL SEARCH menu is displayed. 2. Highlight Scan Mode and select the type of channel you are adding: Analog, Digital, or Analog/Digital. 3. Highlight From Channel and enter the channel where you want to begin the scan. (Use the Left Arrow button to backspace. Use the Number Pad on the remote to enter the channel.) 4. WHidieghliZgohom t To NCohrmaanl nPealnoarnamdicenter the channel where you want to end the scan. (Use the Left Arrow button to backspace. Use Wtihdee NuZomomberNPoramdal onPatnhoreamriec mote to enter the channel.) 5. EHxitighligh2Dt Start3Dand press OK. The partial channel search begins. 6. EWxitait un2tDil the p3ADaBCrtial channel search is 100% complete. Highlight Done and press OK. 7. IPnpruetss thWeideEXIT ACbBCuC tton on the remote. Input Wide CC Sleep Timer Sleep Timer Picture Audio Picture Audio Network Settings Help Network Settings Help 36