Vizio D48-D0 User Manual English - Page 34

4 USING THE NETWORK CONNECTION MENU Your TV is Internet-ready, featuring both an Ethernet port and built-in high-speed Wireless-N. Connecting to a Wireless Network To connect to a wireless network whose network name (SSID) is being broadcast: If your TV is connected to a network with an Ethernet cable, you will not see the wireless network connection menu. You must disconnect the Ethernet cable to set up a wireless network connection. 1. Press the MENU button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons on the remote to highlight Network and press OK. The NETWORK menu is displayed. 3. If you do not see your wireless network displayed, highlight More Access Points and press OK. The WIRELESS ACCESS POINTS menu, which is a list of available wireless networks, is displayed. 4. Highlight the name of your wireless network (this is the network's SSID) and press OK. 5. Using the on-screeen keyboard, enter your network's password, then highlight Connect and press OK. VIZIO NETWORK Wired Connection Disconnected Wireless Access Points More Access Points WPS Manual Setup Hidden Network Test Connection 6. Press the EXIT button on the remote. Changing the Manual Setup Settings Advanced users can fine-tune the network settings using the Manual Setup feature. To change advanced network settings: 1. From the NETWORK menu, highlight Manual Setup and VIZIO press OK. The MANUAL SETUP MANUAL SETUP menu is displayed. DHCP Off 2. To change the settings manually, use the Arrow buttons on the remote to highlight DHCP and then use the Left/Right Arrow buttons to change the setting to Off. 3. Use the Arrow and OK buttons to adjust each setting: Wide Zoom Normal Panoramic • IP Address - The IP address assigned to the TV. • Subnet Mask - The subnet Exit mas2kD. 3D IP Address Subnet Mask Default Gateway Pref. DNS Server Alt. DNS Server RJ45 MAC 0:0:0:0:0:0 Wireless MAC 0:0:0:0:0:0 Save Cancel • Default Gateway - Your network's dAeBfCault gateway address. •InputPrefW.idDeNS SCeCrver - Your preferred domain name server address. ST•lim eeepr AadltdP. ricDetuNsrseS. Server Audio - Your alternate domain name server 4. Use the Arrow buttons on the remote to highlight Save and press OK. Network Settings Help 5. Press the EXIT button on the remote. Finding MAC Addresses for Network Setup The security settings on your router may require you to enter the TV's MAC address in the router's settings. To find the TV's MAC address: 1. From the NETWORK menu, highlight Manual Setup and press OK. The MANUAL SETUP menu is displayed. 2. WFidine d thZoeomMACNoardmdalrePsasnofroam r itche TV at the bottom of the list. The MAC addresses for the connections in use are displayed: • RJ45 MAC - The Ethernet or RJ45 MAC address may be needed to set up your network when you have connected Exit the 2TDV to yo3Dur network with an Ethernet (Cat 5) cable. • Wireless MAC - The Wireless (WiFi) MAC address may be needed to cAoBnC nect your TV to your network with WiFi. Input Wide CC Sleep Timer Picture Audio Network Settings Help 34