Vizio E321VL E321VL User Manual - Page 15

VIZIO E32VL and E37VL User Manual Chapter 3 VIZIO Remote Control Installing the Batteries 1. Remove the battery cover. 2. Insert two AA batteries into the remote control. Make sure that you match the (+) and (-) symbols on the batteries with the (+) and (-) symbols inside the battery compartment. 3. Replace the battery cover. Precautionary Tips for Inserting the Batteries: x Only use AA batteries. x Do not mix new and old batteries. This may result in cracking or leakage that may cause a fire or lead to personal injury. x Inserting the batteries incorrectly may also result in cracking or leakage that may cause a fire or lead to personal injury. x Dispose of batteries according to local hazardous waste regulations. x Keep the batteries away from children and pets. Remote Control Range x Point the remote control directly at this sensor for the best response to the remote signal. x Do not place any obstacles between the remote control and the remote control sensor. x The effective range of the remote control is approximately 22 feet (7 meters) from the front of the remote control sensor, 30° to the left and right, 20° up and down. VIZIO Remote Control Precautions x The remote control should be kept dry and away from heat sources. Avoid humidity. x If the TV responds erratically to the remote control or does not respond at all, check the batteries. If the batteries are low or exhausted, replace them with fresh batteries. x When not using the remote control for a long period of time, remove the batteries. x Do not take the batteries apart, heat them, or throw them into a fire. x Do not subject the remote control to undue physical stress, such as striking or dropping it. x Do not attempt to clean the remote control with a volatile solvent. Wipe it with a clean, damp cloth. Version 2/10/2010 15 www.VIZIO.com