Vizio E65-C3 User Manual (English) - Page 29
To show or hide the SMPTE Test Pattern or Color Bar Test Pattern
View all Vizio E65-C3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
4 To turn color channels off and on: 1. From the PICTURE menu, use the Arrow buttons to highlight Color Calibration and press the OK button. The COLOR CALIBRATION menu is displayed. 2. Use the Arrow buttons to highlight Color Tuner, and then press the OK button. The Color Tuner menu is displayed. Color Tuner Red Green Blue Cyan Magenta Yellow Hue 0 0 0 0 25 -14 Saturation -1 5 -4 0 -2 0 Brightness -24 0 -22 0 0 0 Offset 0 0 0 Gain 0 0 0 3. Use the Arrow buttons on the remote to highlight Red, Green, or Blue. 4. Press the OK button to turn the color channel off or on. An X appears over a color channel that has been turned off. 5. Use the Arrow buttons to highlight another color channel to turn off or on. Only two color channels can be turned off at the same time. 6. When you are finished with the color channels, press the EXIT button. To adjust the 11 Point White Balance settings: 1. From the Color Tuner menu, use the Arrow buttons to highlight Color Tuner, and then press the Left/Right Arrow buttons until the 11 Point White Balance menu is displayed. Gain 5% 11 Point White Balance Red Green 0 0 Blue 0 2. Use the Arrow buttons on the remote to highlight the Gain and Color values you wish to adjust. Press the OK button and use the Left/Right Arrow buttons to adjust the value When you are finished press the OK button to save the setting. 3. When you are finished, press the EXIT button. All changes here are saved to Color Temperature. To show or hide the SMPTE Test Pattern or Color Bar Test Pattern: 1. Ensure that you are on an input that is displaying active content. 2. From the Color Tuner menu, use the Arrow buttons to highlight Color Tuner, and then press the Left/Right Arrow buttons until the SMPTE Test Pattern or Color Bar Test Pattern menu is displayed. SMPTE Test Pattern Off 3. Use the Arrow buttons on the remote to highlight Off. Use the Left/Right Arrow buttons to highlight On to show the SMPTE Pattern or Color Bar Test Pattern. -or- To hide the SMPTE Test Pattern or Color Bar Test Pattern, use the Left/Right Arrow buttons to highlight Off. 4. When you are finished, press the EXIT button. 29