Vizio GV46L User Manual - Page 49
Saturation, Sharpness, Custom Color
View all Vizio GV46L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
VIZIO GV46L HDTV User Manual 4.2.4 Saturation Press the or button to highlight Saturation and then press the OK button to access this selection. The menu page will disappear and be replaced by a smaller Saturation Indicator Bar so you can see the color saturation level between the minimum (0) and maximum (100) levels. Use the button to reduce the color and the button to increase the color. When finished, press the OK button to save and exit this setting. The Saturation adjusts the amount of color in the picture. 4.2.5 Hue Press the or button to highlight Hue and then press the OK button to access this selection. The menu page will disappear and be replaced by a smaller Hue Indicator Bar so you can see the hue between from negative (-50) to positive (50). The default is 0. Use the button to change hue in the negative direction and the button to change hue in the positive direction. When finished, press the OK button to save and exit this setting. Hue adjusts the tint of the picture. The easiest way to set tint is to look at flesh tones and adjust for a realistic appearance. In most cases, the default middle position is correct. If people's faces look too orange try reducing the level of color first as the case of this is often too much color. 4.2.6 Sharpness Press the or button to highlight Sharpness and then press the OK button to access this selection. The menu page will disappear and be replaced by a smaller Sharpness Indicator Bar so you can see the sharpness level between the minimum (0) and maximum (24) levels. Use the button to reduce the sharpness and the button to increase the sharpness. When finished, press the OK button to save and exit this setting. The Sharpness adjusts the sharpness of the picture. 4.2.7 Custom Color Press the or button to highlight Custom Color and then press the OK button to access this selection. Custom Color allows you to adjust the White Color Temperature (color shade of white) if you wish to fine tune the factory default setting. Color Temperature is measured in degrees Kelvin (K), television programming and movies are produced with a 6500K color temperature and this is the temperature that should be used for faithful reproduction of the program color. Higher color temperatures result in a bluish white picture. The factory default is set at 6500K. The Custom Color Image Settings sub menu will be displayed. Press the or button to highlight the color you wish to adjust (Red, Green or Blue). The value range is 0 to 100, the default being 50. Use the button to reduce the amount of color selected and the button to increase the amount of color selected. When finished adjusting a color, press the OK button to save and exit the color selected. Press the button to return to the Image Settings menu. Version 5/18/2007 49 www.VIZIOCE.com