Vizio M65-E0 User Manual - Page 14

3 Adjusting More Picture Settings To adjust more picture settings: 1. From the PICTURE menu, use the Arrow buttons to highlight More Picture, and then press OK. More Picture Color Temperature Back Normal 2. Use the Arrow buttons to Black Detail Off highlight the setting you wish Active LED Zones On to adjust, then press the Left/ Clear Action Off Right Arrow buttons to change Reduce Noise the setting: Game Low Latency Off • Color Temperature - Pure Cinema Auto See Adjusting the Color Color Space Auto Temperature on this page. Gamma 2.1 • Black Detail - Adjusts the average brightness of the picture to compensate for large areas of brightness. Select Off, Low, Medium, or High. • Active LED Zones - Dynamically improves the contrast ratio of the picture by adjusting the backlight. The adjustment is controlled by the content on the screen. Select On or Off. • Clear Action - Reduces blur in scenes with fast action. Some sensitive viewers may notice flickering. Select On or Off. • Reduce Noise - Opens a sub-menu with two settings: • Reduce Signal Noise - Diminishes artifacts in the image caused by the digitizing of image motion content. Select Off, Low, Medium, or High. • Reduce Block Noise - Reduces pixelation and distortion for mpeg files. Select Off, Low, Medium, or High. • Game Low Latency - Select On to reduce video delay (lag) when gaming. • Pure Cinema Mode - Optimizes the picture for watching film. Select Auto or Off. • Color Space - Select Color Space for the source. Video sources uses YCbCr, but PC uses RGB. • Gamma - Set the shape of the Gamma curve. Use lower Gamma values for bright room conditions, and higher values when it's dark. 3. When you have finished adjusting More Picture Settings, press the EXIT button on the remote. Adjusting the Color Temperature Adjusting the color temperature changes the white balance of the picture. To adjust the color temperature: Back Color Temperature 1. From the MORE PICTURE menu, use the Arrow buttons to Normal highlight Color Temperature, Cool and then press OK. Computer 2. Use the Arrow buttons on the remote to highlight a color temperature preset and then press OK. • Normal is optimized for television viewing. • Cool produces a blue-hued picture. • Computer optimizes the picture for use as a PC monitor. 3. When you have finished adjusting the color temperature, press the EXIT button on the remote. 14