Vizio PQ65-F1 User Manual - Page 15

3 Adjusting More Picture Settings To adjust more picture settings: 1. From the PICTURE menu, use the Arrow buttons to highlight More Picture, and then press OK. More Picture Color Temperature Back Normal 2. Use the Arrow buttons to highlight the setting you wish to adjust, then press the Left/ Right Arrow buttons to change the setting: Black Detail Off Xtreme Black Engine Pro™ Low Reduce Judder 5 Reduce Motion Blur 5 Clear Action Off • Color Temperature See Adjusting the Color Temperature. Reduce Noise Game Low Latency Off Film Mode On • Black Detail - Adjusts the Color Space Auto average brightness of the Gamma 2.1 picture to compensate for large areas of brightness. Select Off, Low, Medium, or High. • Xtreme Black Engine Pro™ - Based on the content, dynamically adjusts and balances the brightness and the contrast ratio of the picture by locally adjusting backlight zones. • Reduce Judder - Increases frame rate to reduce judder for film and 30 hertz video. As the setting increases, judder is reduced. • Reduce Motion Blur - Increases frame rate to reduce motion blur of 60 hertz video. As the setting increases, motion blur is reduced. • Clear Action - Reduces blur in scenes with fast action but limtis the range for the Backlight setting. • Reduce Noise - Opens a sub-menu with two settings: • Reduce Signal Noise - Diminishes artifacts in the image caused by the digitizing of image motion content. Select Off, Low, Medium, or High. • Reduce Block Noise - Reduces pixelation and distortion for mpeg files. Select Off, Low, Medium, or High. • Game Low Latency - Select On to reduce video delay (lag) when gaming. • Film Mode - Optimizes the picture for watching film. Select Auto or Off. • Color Space - Select Color Space for the source. Video sources uses YCbCr, but PC uses RGB. • Gamma - Set the shape of the Gamma curve. Use lower Gamma values for bright room conditions, and higher values when it's dark. 3. When you have finished adjusting More Picture Settings, press the Exit button on the remote. Adjusting the Color Temperature Adjusting the color temperature changes the white balance of the picture. To adjust the color temperature: Color Temperature Back 1. From the MORE PICTURE menu, use the Arrow buttons to Normal highlight Color Temperature, Cool and then press OK. Computer 2. Use the Arrow buttons on the remote to highlight a color temperature preset and then press OK. • Normal is optimized for television viewing. • Cool produces a blue-hued picture. • Computer optimizes the picture for use as a PC monitor. 3. When you have finished adjusting the color temperature, press the Exit button on the remote. 15