Vizio RS65-B2 User Manual - Page 18

2 ADJUSTING THE AUDIO SETTINGS To adjust the audio settings: 1. Press the MENU button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons on the remote to highlight Audio and press OK. The AUDIO menu is displayed. 3. Use the Arrow buttons to highlight the setting you wish to adjust, then press Left/ Right Arrow buttons to change the setting: • Base - Adjusts low-frequency sounds. • Treble - Adjusts high-frequency sounds. • Center - Adjusts center audio. VIZIO - AUDIO - Bass - Treble - Center - Balance - - Surround Balance - Surround Volume Subwoofer Lip Sync Digital Audio Out Analog Audio Out Bluetooth Pair Advanced Audio + + 0 + +0 +0 +0 +0 0 + 0 0 Bitstream Fixed • Balance - Adjusts the loudness of the audio output from the left and right speakers. • Surround Balance - Adjusts the left and right balance of the surround sound. • Surround Volume - Adjusts the volume of the surround sound. • Subwoofer - Adjusts the volume of the subwoofer. • Lip Sync - Adjusts the synchronization between the display image and the accompanying audio track. • Digital Audio Out - Changes the type of processing for digital audio out and HDMI ARC output when connected to a home theater audio system. Select PCM or Bitstream. You must select Bitstream for audio with more than two channels (3.0, 5.0, or 5.1, for example). • Analog Audio Out - Sets the volume control properties for the RCA connector when connected to a home theater audio Wide sysZotoemm. SNeolermcatl VaParnioarabmleic if you are controlling the volume with the TV's volume controls, or select Fixed if an external audio device (sound bar or AV receiver) will control the volume. • Bluetooth Pair - Pair a new device to the TV's soudbar and Exit sub2wDoofer3oDr reconnect a previously paired device. 4. When you have finished adjusting the audio settings, press the EXIT button onABtChe remote. Input Wide CC Sleep Timer Picture Audio Network Settings Help Adjusting Advance Audio Setting To adjust the Advance Audio Settings: 1. Press the MENU button on the remote. The on-screen menu is displayed. VIZIO ADVANCED AUDIO 2. Use the Arrow buttons on the TV Sound Bar Off remote to highlight Audio and Surround Speakers On press OK. The AUDIO menu is Volume Leveling Off displayed. Subwoofer Pair 3. Use the Arrow buttons to highlight Advanced and press OK. The Audio Audio Settings menu is displayed. Audio Channel Check Reset Sound Bar 4. Use the Arrow buttons to highlight the setting you wish to adjust, then press Left/Right Arrow buttons to change the setting: • TV Sound Bar - Turns the Sound Bar on or off. Turning off the TV sound bar is necessary when using a headset or other external audio device. • Surround Speakers - Turns the Surround Sound Speakers on or off. • Volume Leveling - Volume leveling uses DTS TruVolume™ to maintain consistent volume levels during transitions between program content, AV formats, and input sources. Select On or Off. In a few cases, volume leveling may artificially suppress volume increases, making it difficult to hear dialog or flattening sudden noises. If this occurs, turn volume leveling off. • Subwoofer Pair - Reconnects the TV to the subwoofer. By defualt, the TV comes paired with the subwoofer. • Audio Channel Check - Checks the audio channels for the TV soundbar. • Reset Sound Bar - Resets the TV soundbar to factory defaults. 5. Press the EXIT button on the remote when finished. Wide Zoom Exit 2D Input Wid Sleep Timer Pictu Network Settin 18