Vizio S2120w-E0 Quickstart Guide (English) - Page 14

LED INDICATORS The LED Indicators give visual feedback when you press buttons on the remote control. Function Input LED Behavior Analog Audio In - AUX (1) Analog Audio In - AUX (2) Coaxial In - Digital (3) Digital Optical Audio In Optical (4) Bluetooth USB Device - USB Description Press the INPUT button on the remote to cycle through each available input: • Analog Audio In - AUX (1) • Analog Audio In - AUX (2) • Coaxial In- Digital (3) • Digital Optical Audio In - Optical (4) • Bluetooth • USB Device - USB Bluetooth Pairing DTS TruVolume On/Off (When searching for device) Flash from Left to Right and back continuously. TruVolume On: TruVolume Off: Press and hold the button on the remote. The Sound Stand will be discoverable for 15 minutes. You can now search for the Sound Stand (VIZIO S2120w) using your Bluetooth Device. The Sound Stand will power down if no device is found. Note: Set your Bluetooth device into pairing mode prior to the Sound Stand. Press the TVOL button to enable/disable TruVolume. When enabled (On), TruVolume provides a consistent and comfortable volume level for a more enjoyable listening experience. DTS TruSurround On/Off TruSurround On: TruSurround Off: Press the TSHD button to enable/disable DTS TruSurround. When enabled (On), all inputs will produce virtual surround sound. When disabled (Off), all sources will playback in 2.1 stereo. Treble Levels Bass Levels Dolby Digital Two center LEDs indicate Treble level 0. Two center LEDs indicate Bass level 0. Dolby Digital Indicator. Press the TREBLE button then press the Next/Previous button to increase/decrease the treble level. The LED indicators will move to the right with increasing levels and to the left with decreasing levels. Press the BASS button then press the Next/Previous button to increase/decrease the bass level. The LED indicators will move to the right with increasing levels and to the left with decreasing levels. Dolby Digital is only available on either the Coaxial In or Digital Optical Audio In inputs. When a Dolby Digital signal is detected, the Dolby Digital LED indicator will light up for 5 seconds before fading away. 12