Vizio S3821w-C0 Quickstart Guide - Page 12

LED INDICATORS LED Indicators are located here: The LED Indicators will behave differently with each button on the remote control. Function LED Behavior Analog Audio In - AUX (1) Description Press the INPUT button on the remote to cycle through each available input: Input Analog Audio In - AUX (2) Coaxial In - Digital (3) Digital Optical Audio In Optical (4) Bluetooth USB Device - USB (6) • Analog Audio In - AUX (1) • Analog Audio In - AUX (2) • Coaxial In- Digital (3) • Digital Optical Audio In - Optical (4) • Bluetooth • USB Device - USB (6) Bluetooth Pairing DTS TruVolume On/Off DTS TruSurround On/Off Treble Levels Bass Levels (When searching for device) Flash from Left to Right and back continuously. Press and hold the button on the remote. The Sound Bar will be discoverable for 15 minutes. You can now search for the Sound Bar (VIZIO S3821w) using your Bluetooth Device. The sound bar will power down if no device is found. Note: Set your Bluetooth device into pairing mode prior to the Sound Bar. TruVolume On: TruVolume Off: Press the TVOL button to enable/disable TruVolume. When enabled (On), TruVolume provides a consistent and comfortable volume level for a more enjoyable listening experience. TruSurround On: TruSurround Off: Press the TSHD button to enable/disable DTS TruSurround. When enabled (On), all inputs will produce virtual surround sound. When disabled (Off), all sources will playback in 2.1 stereo. Two center LEDs indicate Treble level 0. Two center LEDs indicate Bass level 0. Press the TREBLE button then press the Next/Previous button to increase/decrease the treble level. The LED indicators will move to the right with increasing levels and to the left with decreasing levels. Press the BASS button then press the Next/Previous button to increase/decrease the bass level. The LED indicators will move to the right with increasing levels and to the left with decreasing levels.