Vizio SB36312-G6 User Manual - Page 22

Function WiFi Setup WiFi Setup Reset Reset All Info Info When a Dolby Audio, Dolby Atmos or DTS audio format is detected. When the sound bar successfully connects to Wi-Fi. English - 22 LED Behavior Single light with sound upon confirmation All 10 LEDs will flash 3 times once settings are reset −− Dolby Audio, Dolby Atmos or DTS audio format is detected Indicator LED Description Press the Next/Previous and Play buttons to select and confirm enabling or disabling WiFi Setup on your sound bar. WiFi Setup allows the VIZIO SmartCast Mobile app to reconnect the sound bar to Wi-Fi or paired bluetooth devices in the event of a lost connection or if a new device is being paired. Press the Next/Previous buttons to reset either Audio or All settings. Press the Play button to select. Audio - Only audio settings, such as bass and treble levels, will be reset. All - All paired Bluetooth devices will be unpaired and all network settings will be lost. All programmed IR remotes will also be removed. See the Reset to Factory Default Settings section for more information. Press the Play button to have the sound bar verbally announce the current sound bar input and audio type being played with corresponding LED indicators. Dolby Audio or DTS are available on the HDMI ARC, HDMI In, and Digital Optical Audio In inputs. Dolby Atmos is available on HDMI ARC and HDMI In when connected to supported devices and streaming services. When a Dolby or DTS signal is detected, the Dolby Atmos (Green) / Dolby Audio (White)/ DTS (Amber) indicator LED will light up for 5 seconds before fading away. Wi-Fi Indicator LED When Wi-Fi is successfully set up via the VIZIO SmartCast Mobile app or through an Ethernet connection, the blue indicator LED will light up to confirm a successful connection.