Vizio VM230XVT VM230XVT User Manual - Page 12

VIZIO VM190XVT/VM230XVT User Manual Chapter 3 VIZIO Remote Control Installing the Batteries 1. Remove the battery cover. 2. Insert two AAA batteries into the remote control. Make sure that you match the (+) and (-) symbols on the batteries with the (+) and (-) symbols inside the battery compartment. 3. Replace the battery cover. Precautionary Tips for Inserting the Batteries:  Only use Alkaline AAA batteries.  Do not mix new and old batteries. This may result in cracking or leakage that may cause a fire or lead to personal injury.  Inserting the batteries incorrectly may also result in cracking or leakage that may cause a fire or lead to personal injury.  Dispose of batteries according to local hazardous waste regulations.  Keep the batteries away from children and pets. Remote Control Range  Point the remote control directly at this sensor for the best response to the remote signal.  Do not place any obstacles between the remote control and the remote control sensor.  The effective range of the remote control is approximately 22 feet (7 meters) from the front of the remote control sensor, 30° to the left and right, 20° up and down. VIZIO Remote Control Precautions  The remote control should be kept dry and away from heat sources. Avoid humidity.  If the TV responds erratically to the remote control or does not respond at all, check the batteries. If the batteries are low or exhausted, replace them with fresh batteries.  When not using the remote control for a long period of time, remove the batteries.  Do not take the batteries apart, heat them, or throw them into a fire.  Do not subject the remote control to undue physical stress, such as striking or dropping it.  Do not attempt to clean the remote control with a volatile solvent. Wipe it with a clean, damp cloth. 12 www.VIZIO.com