Vizio VMT37-60S User Manual - Page 7
Concrete Walls - the 60 wall mount
View all Vizio VMT37-60S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Concrete Walls A VIZIO VMT37-60S User Manual B A. Mark and drill holes 1. Tape the included Wall Mount Template to the wall. Hold the wall plate [1] up to the Wall Mount Template and use the built-in level to make sure it is level. Put the wall plate [1] aside. 2. Drill 6 holes with a 1/2" masonry bit, 2-1/2" deep where indicated. Remove the Wall Mount Template. B. Install anchors 1. Install the provided anchors [5] in the holes, flush with the wall so that the hinged end faces out. C C. Anchor mount to wall 1. Using a 1/2" wrench or socket, attach the wall plate [1] to the wall with the supplied lag bolts and washers [3] & [4]. 2. Use the level before tightening bolts. Note: It is important to make sure the wall plate is level. Note: Do not over-tighten lag bolts. Tighten only until they are firmly against the wall plate. Version 10/16/2009 7 www.VIZIO.com