Vizio VX32LHDTV10A User Manual
Vizio VX32LHDTV10A - 32" LCD TV Manual
 |
View all Vizio VX32LHDTV10A manuals
Add to My Manuals
Save this manual to your list of manuals |
Vizio VX32LHDTV10A manual content summary:
- Vizio VX32LHDTV10A | User Manual - Page 1
User Manual Dear VIZIO Customer, Congratulations on your new VIZIO VX32L High Definition LCD Television purchase. Thank you for your support. For maximum benefit of your set, please read these instructions the standard warranty, VIZIO offers onsite extended warranty service plans. These plans give - Vizio VX32LHDTV10A | User Manual - Page 2
of power supplied to your home, consult your dealer or local power company. • The power cable must be replaced when using different voltage from that specified in the User Manual. For more information, contact your dealer. • The VX32L HDTV20A is equipped with a three-pronged grounded plug, a plug - Vizio VX32LHDTV10A | User Manual - Page 3
VIZIO VX32L HDTV20A User Manual Television Antenna Connection Protection External Television Antenna Grounding If an outside antenna/satellite dish or cable system is to be connected to the TV, make sure that the antenna or cable system is electrically grounded to provide some protection against - Vizio VX32LHDTV10A | User Manual - Page 4
Contents VIZIO VX32L HDTV20A VIZIO Remote Control Power Cord VIZIO Bezel and Screen Cleaning Cloth This User Manual Quick Setup Guide Registration Card VIP Services Brochure 2 (Double A) Batteries for the Remote Control VIZIO Warranty and Repair Information Version 5/20/2008 4 www.VIZIO.com - Vizio VX32LHDTV10A | User Manual - Page 5
VX32L HDTV20A User Manual Additional Certified Accessories for the VIZIO VX32L HDTV20A are sold separately Wall Mounts High Definition Cables Extra or replacement Remote VIZIO also offers Installation Services and Extended Warranty Services for your VIZIO VX32L HDTV20A To purchase or inquire about - Vizio VX32LHDTV10A | User Manual - Page 6
VIZIO VX32L HDTV20A User Manual Preparing Your LCD HDTV for Wall Mounting The VIZIO VX32L can either be kept on the stand base or mounted on the wall for viewing. If you choose to mount the VX32L on the wall, please follow the instructions below for removing the stand base. To remove the stand base - Vizio VX32LHDTV10A | User Manual - Page 7
VIZIO VX32L HDTV20A User Manual Table of Contents Chapter 1 Basic Controls and Connections 9 1.1 Front Panel...9 1.2 Right Side Panel Controls ...9 1.3 Left Side Connections ...10 1.4 Rear Panel Connections ...11 1.5 VIZIO Remote Control...12 1.5.1 Insertion of Batteries in the Remote Control 13 - Vizio VX32LHDTV10A | User Manual - Page 8
Style (Digital CC Style 51 3.5.8 Reset All Settings ...51 3.6 DTV / TV Input Parental Control...52 3.6.1 Channel Block ...52 3.6.2 TV Rating...53 3.6.3 Movie Rating...54 3.6.4 Check for New DTV Rating...54 3.6.5 Blocked Unrated Programming...55 3.6.6 Change the Password ...55 3.7 HDMI Input Picture - Vizio VX32LHDTV10A | User Manual - Page 9
User Manual Chapter 1 Basic Controls and Connections 1.1 Front Panel Power 'VIZIO' light - The VIZIO name lights white when powered on and orange when powered off. Remote Control Sensor - This is the window through which all of the remote control signals pass to the sensor. Point the remote control - Vizio VX32LHDTV10A | User Manual - Page 10
VIZIO VX32L HDTV20A User Manual 1.3 Left Side Connections 1. AV2/S-VIDEO IN - Connect the secondary source for composite video devices, such as a VCR or video game. Use the white and red connectors to connect the external audio from the same source. This connection is on the left hand side of the TV - Vizio VX32LHDTV10A | User Manual - Page 11
VIZIO VX32L HDTV20A User Manual 1.4 Rear Panel Connections 1 2 4 6 8 9 11 3 5 7 10 1. AC IN - Plug-in the supplied AC Power Cord here. 2. SERVICE - This custom communication port is for factory service only. Use of this input for any purpose other than factory authorized service - Vizio VX32LHDTV10A | User Manual - Page 12
User Manual 1.5 VIZIO Remote Control GUIDE - This button displays program information. Press this button once and the information of the program being viewed is shown. Press it a second time and the Electronic Programming Guide will appear in the screen. POWER - Press this button to turn the TV - Vizio VX32LHDTV10A | User Manual - Page 13
, 20° up and down. 1.5.3 VIZIO Remote Control Precautions The remote control should be kept dry and away from heat sources. Avoid humidity. If the TV responds erratically to the remote control or does respond at all, check the batteries. If the batteries are low or exhausted, replace them with fresh - Vizio VX32LHDTV10A | User Manual - Page 14
User Manual Chapter 2 Connecting Equipment 2.1 Which Video Connection Should I Use? The VIZIO VX32L has six different ways to connect your video equipment from a basic connection to the most advanced for digital displays. Connection Quality (type) Connector Rear Panel Color Codes Description - Vizio VX32LHDTV10A | User Manual - Page 15
. 3. Turn on the power to the HDTV. 4. Select DTV using the INPUT button on the remote or side of the HDTV, or directly by pressing the TV button on the Remote Control. Note: a) b) c) d) Not all digital TV broadcasts are High Definition (HD). Refer to the program guides, or consult your cable - Vizio VX32LHDTV10A | User Manual - Page 16
, or directly by pressing the HDMI button on the Remote Control. 5. If HDMI 1 is being used, used HDMI 2 as the input and follow steps 1 through 3; and then select HDMI 2 in step 4. Note: a) b) The HDMI input on the HDTV supports High-bandwidth Digital Content Protection (HDCP). HDCP encrypts - Vizio VX32LHDTV10A | User Manual - Page 17
the HDTV. 4. Turn on the power to the HDTV and HDTV Set-Top Box. 5. Select HDMI using the INPUT button on the remote or side of the HDTV, or directly by pressing the HDMI button on the Remote Control. Note: The HDMI Input is for HD Video and will only support 640x480 at 60Hz from a PC. Use - Vizio VX32LHDTV10A | User Manual - Page 18
or directly by pressing the Component button on the Remote Control. 8. If Component 1 input is being used, use Component 2 as the input and follow the steps 1 through 6; and then select Component 2 in step 7. Note: Refer to your HDTV Set-Top Box user manual for more information about the video - Vizio VX32LHDTV10A | User Manual - Page 19
HDTV. 3. Turn on the power to the HDTV and Set-Top Box. 4. Select TV using the INPUT button on the remote or side of the HDTV, or directly by pressing the TV button (below the GUIDE button) on the Remote Control. Note: Refer to your Set Top Box user manual for more information about selecting - Vizio VX32LHDTV10A | User Manual - Page 20
VX32L HDTV20A User Manual 2.5 Connecting Your DVD Player You have several options for connecting your DVD player to your VIZIO VX32L HDTV20A; HDMI, Component, AV (S-Video or Composite) inputs. Based on your configuration, you can decide which option is right for you. 2.5.1 Using HDMI DVD players - Vizio VX32LHDTV10A | User Manual - Page 21
the rear of the HDTV. 4. Turn on the power to the HDTV and your DVD player. 5. Select HDMI 2 using the INPUT button on the remote or side of the HDTV, or directly by pressing the HDMI button on the Remote. Note: Refer to your DVD player user manual for more information about the video output - Vizio VX32LHDTV10A | User Manual - Page 22
HDTV, or directly by pressing the Component button on the Remote Control. 8. If Component 1 input is being used, use Component 2 as the input and follow the steps 1 through 6; and then select Component 2 in step 7. Note: Refer to your DVD player user manual for more information about the video - Vizio VX32LHDTV10A | User Manual - Page 23
side of the HDTV, or directly by pressing the AV button on the Remote Control. 6. If AV1 input is being used, use AV2 as the input and follow steps 1 through 4; and then select AV2 in step 5. Note: Refer to your DVD player user manual for more information about the video output requirements of - Vizio VX32LHDTV10A | User Manual - Page 24
the HDTV, or directly by pressing the AV button on the Remote Control. Note: Keep in mind that the signal through the S-Video connection will take priority when this input is being used. Note: Refer to your VCR or Video Camera user manual for more information about the video output requirements - Vizio VX32LHDTV10A | User Manual - Page 25
white area) audio connectors at the rear of the LCD HDTV. 3. Turn on the power to the LCD HDTV and Receiver/Amp. 4. Then press the MENU button on the remote control to open the On-Screen Display (OSD) menu. 5. Press the on the remote control to select the Audio menu. 6. Press the on the - Vizio VX32LHDTV10A | User Manual - Page 26
directly by pressing the RGB button on the Remote Control. Note: a) b) For the best picture quality when connecting a pc computer through RGB PC, set your pc computer timing mode to VESA 1360 x 768 at 60Hz. Please refer to the pc or graphic card's user guide for additional information on how to - Vizio VX32LHDTV10A | User Manual - Page 27
VIZIO VX32L HDTV20A User Manual 2.8.1 Preset PC Resolutions If connecting to a PC through the RGB PC input, set the TV timing mode to VESA 1366x768 at 60Hz for best picture quality (refer to the graphic card's user guide for questions on how to set this timing mode). Please see the table below for - Vizio VX32LHDTV10A | User Manual - Page 28
VIZIO VX32L HDTV20A User Manual 2.9 Setting Up to Watch Television For 'Preparing Your LCD HDTV for Wall Mounting', see page 6. 2.10 Basic LCD HDTV Start Up 1. Connecting the Power Cable Connect the power cord to the power cord connector on the back of the HDTV, and then plug the power cord into an - Vizio VX32LHDTV10A | User Manual - Page 29
VIZIO VX32L HDTV20A User Manual b. The Tuner screen will be displayed; default choice is Antenna. If you are using Cable (No Box) Service, press the button on the remote control to highlight CABLE. Press the button on the remote to go to the next screen. c. The Channel Scan screen will be displayed; - Vizio VX32LHDTV10A | User Manual - Page 30
your cable operator for more information. e. When finished, the Complete screen will be displayed to inform you that the HDTV has completed the Initial Setup. Press the button on the remote control to exit and begin watching TV. 5. Select Input Source Select the Input Source for the HDTV by - Vizio VX32LHDTV10A | User Manual - Page 31
refer to Owner or User's Manual of such equipment for details. Note: The TV set will be displaying any television station or program selected by the Cable Box, VCR, External Tuner or Satellite Receiver. The TV set will not be able to change programs or channels; this is controlled by the equipment - Vizio VX32LHDTV10A | User Manual - Page 32
VIZIO VX32L HDTV20A User Manual d. Press either or button to select the Picture Mode option. e. Press either or button to change the Picture Mode option to Standard. f. Press the LAST key once to return to the previous screen or repeatedly to return to your program if task has been completed. - Vizio VX32LHDTV10A | User Manual - Page 33
Manual 2.11 Watching a TV Program Before you start watching TV, please make sure that any cable, satellite or off-air antenna connections are secure. Also, verify that the power cord is plugged into a correctly grounded electrical outlet or surge protector. 1. Press the power button on the remote - Vizio VX32LHDTV10A | User Manual - Page 34
VIZIO VX32L HDTV20A User Manual 2.12 Adjusting Basic HDTV Settings Volume To increase the volume, press and hold the VOL+ or VOL- button on the side of the LCD HDTV or remote control until the desired level is reached. TV Channels To step up or down through the available TV channels, press the CH+ - Vizio VX32LHDTV10A | User Manual - Page 35
VIZIO VX32L HDTV20A User Manual 2.13 Program Information Press the GUIDE button on the remote and program information for the channel you are watching will be displayed on the screen with the live program content in a small window in the lower left corner. Press the GUIDE button twice and the - Vizio VX32LHDTV10A | User Manual - Page 36
VIZIO VX32L HDTV20A User Manual Chapter 3 Advanced Adjustment of HDTV 3.1 Using the On Screen Display (OSD) The remote control or the control buttons on the right hand side of the TV can control all the function settings. The On Screen Display (OSD) allows you to adjust the save contrast, - Vizio VX32LHDTV10A | User Manual - Page 37
VIZIO VX32L HDTV20A User Manual 3.2 DTV / TV Input Picture Adjustment 3.2.1 Picture Mode When the MENU button is pressed, the On Screen Display (OSD) appears on the PICTURE adjustment page. Press the button to highlight the Picture Mode selection. Use the or button to choose from Custom, Standard, - Vizio VX32LHDTV10A | User Manual - Page 38
VIZIO VX32L HDTV20A User Manual 3.2.2 Backlight Press the selection. button to highlight the Backlight Press the button to start adjusting the brightness of the Backlight and the menu page will disappear and be replaced by a small Backlight Indicator Bar so you can see the light level - Vizio VX32LHDTV10A | User Manual - Page 39
VIZIO VX32L HDTV20A User Manual 3.2.4 Contrast Press the button to highlight the Contrast selection. Press the button to start adjusting the contrast and the menu page will disappear and be replaced by a small Contrast Indicator Bar so you can see the contrast level between the minimum and maximum - Vizio VX32LHDTV10A | User Manual - Page 40
VIZIO VX32L HDTV20A User Manual 3.2.7 Sharpness Press the button to highlight the Sharpness selection. Press the button to start adjusting the sharpness and the menu page will disappear and be replaced by a small Sharpness Indicator Bar so you can see the sharpness level between the minimum and - Vizio VX32LHDTV10A | User Manual - Page 41
VIZIO VX32L HDTV20A User Manual 3.2.9 Advanced Video Press the button to highlight the option for Advanced Video selection. Press the MENU button. A new menu will be displayed showing the advanced functions available for fine tuning of the picture. DNR Press the button to highlight DNR (Dynamic - Vizio VX32LHDTV10A | User Manual - Page 42
VIZIO VX32L HDTV20A User Manual CTI Press the button to highlight CTI (Color Transient Improvement). This feature can be used to reduce the time taken to transition from one color to another. The effect will be seen as sharpening the border between colors. Press the or button to choose from the Off, - Vizio VX32LHDTV10A | User Manual - Page 43
VIZIO VX32L HDTV20A User Manual 3.3 DTV / TV Input Audio Adjustment 3.3.1 Volume When the MENU button is pressed, the On Screen Display (OSD) appears on the PICTURE adjustment page. Press the button to display the AUDIO ADJUST page. Press the selection. button to highlight the Volume Press the - Vizio VX32LHDTV10A | User Manual - Page 44
VIZIO VX32L HDTV20A User Manual 3.3.3 Treble Press the button to highlight the Treble selection. Press the button to start adjusting the treble and the menu page will disappear and be replaced by a small Treble Indicator Bar, as before, so you can see the treble level between the zero and maximum - Vizio VX32LHDTV10A | User Manual - Page 45
VIZIO VX32L HDTV20A User Manual 3.3.7 Speakers Press the button to highlight the Speakers selection. Press the button to turn the internal speakers On or Off. You may want to turn-off the internal speakers when listening to the audio through your Home - Vizio VX32LHDTV10A | User Manual - Page 46
SETUP menu. buttons to open the TV Press the button to highlight SKIP CHANNEL. Press the button to select this channel to be skipped when using the CH+ or CH- button. You will still be able to select this channel using the number buttons on the remote control. Version 5/20/2008 46 www.VIZIO.com - Vizio VX32LHDTV10A | User Manual - Page 47
the correct program times are shown after pressing the GUIDE button on the remote control. Press the button to highlight the Auto Search selection. Press either or button to select your area. Press the LAST key once to return to the previous screen or repeatedly to return to your program if task - Vizio VX32LHDTV10A | User Manual - Page 48
VIZIO VX32L HDTV20A User Manual 3.5 DTV / TV Input Setup 3.5.1 Language When the MENU button is pressed, the On Screen Display (OSD) appears on the PICTURE adjustment page. Press the button until the SETUP page is displayed. Press the button to highlight the Language selection. The default - Vizio VX32LHDTV10A | User Manual - Page 49
. Press button to highlight this option. Press button to obtain the next screen which shows the different inputs. Press button to select the bracket. VIZIO VX32L HDTV20A User Manual Press either the or button and select either the letter or number belongs to this place. Press the button to go - Vizio VX32LHDTV10A | User Manual - Page 50
User Manual 3.5.5 Closed Caption (CC) When watching regular analog (NTSC) TV, the Analog CC feature is available in the Setup menu. Press the selection. button to highlight the Analog CC Press the CC4. button to select CC1, CC2, CC3 or Press the LAST key once to return to the previous screen - Vizio VX32LHDTV10A | User Manual - Page 51
VIZIO VX32L HDTV20A User Manual 3.5.7 Digital Closed Caption Style (Digital CC Style) When watching DTV, the Digital CC Style feature is available in the Setup menu. Press the button to highlight the Digital CC Style selection. Press the button to go to the next screen. Press either or button to - Vizio VX32LHDTV10A | User Manual - Page 52
has been entered and accepted by the TV. When the MENU button is pressed, the On Screen Display (OSD) appears on the PICTURE adjustment page. Press either the or button to scroll across to the icon showing the padlock key, the PARENTAL control password screen will appear on the display. Press - Vizio VX32LHDTV10A | User Manual - Page 53
VIZIO VX32L HDTV20A User Manual Press the button to highlight the Channel Block selection. Press the button to turn it on or off. Press the LAST key once to return to the previous screen or repeatedly to return to your program if task has been completed. 3.6.2 TV Rating Follow the procedure in - Vizio VX32LHDTV10A | User Manual - Page 54
of the Check for New DTV Rating. If option is faded out, no update is available (the option is not activated in your area). If it is not faded out, press either or button to select this option. Press button to execute this operation. Please follow the on screen instructions to complete this - Vizio VX32LHDTV10A | User Manual - Page 55
the Access Code Edit selection. Press the button and the new Password panel will be displayed. Enter the new, 4-digit password using the number buttons on the remote. Enter it a second time to confirm you entered it correctly. Press the LAST key once to return to the previous screen or repeatedly - Vizio VX32LHDTV10A | User Manual - Page 56
VIZIO VX32L HDTV20A User Manual 3.7 HDMI Input Picture Adjustment The Picture Adjust menu operates in the same way for the HDMI Input as for the DTV / TV input in section 3.2. The menu difference is that there is no icon along the top for DTV / TV or Parental Control adjustments. 3.8 HDMI Input - Vizio VX32LHDTV10A | User Manual - Page 57
VIZIO VX32L HDTV20A User Manual 3.10 Video Input Picture Adjustment The Picture Adjust menu operates in the same way for Video Inputs (Component and AV) as for the DTV / TV input in section 3.2. The menu difference is that there is no icon along the top for DTV / TV adjustments. 3.11 Video Input - Vizio VX32LHDTV10A | User Manual - Page 58
VIZIO VX32L HDTV20A User Manual 3.12 Video Input Setup The Setup menu operates in the same way for Video Inputs (Component and AV) as for the TV input in section 3.4. The menu difference is that there is no icon along the top for TV adjustments. 3.13 Video Input Parental Control The Parental Control - Vizio VX32LHDTV10A | User Manual - Page 59
VIZIO VX32L HDTV20A User Manual 3.14 PC Input Picture Adjustment The Picture Adjust menu operates in the same way for the PC Input as for the DTV / TV input in section 3.2 for Backlight, Contrast, Brightness and Color Temperature. 3.14.1 Auto Adjust When the MENU button is pressed, the On Screen - Vizio VX32LHDTV10A | User Manual - Page 60
VIZIO VX32L HDTV20A User Manual 3.14.3 Brightness Press the selection. button to highlight the Brightness Press the button to start adjusting the brightness and the menu page will disappear and be replaced by a small Brightness Indicator Bar so you can see the brightness level between the - Vizio VX32LHDTV10A | User Manual - Page 61
VIZIO VX32L HDTV20A User Manual 3.14.5 Color Temperature Press the button to highlight the option for Color Temperature selection. The default is COOL; this is the 9300K setting. Press the or button if you want to choose the Normal or Custom option. If you choose the Custom option, then a new - Vizio VX32LHDTV10A | User Manual - Page 62
VIZIO VX32L HDTV20A User Manual 3.14.8 V. Position Press the button to highlight the Vertical Shift selection. Press the button to start adjusting the vertical position of the picture. Use the or button to adjust the vertical position. Press the LAST key once to return to the previous screen or - Vizio VX32LHDTV10A | User Manual - Page 63
VIZIO VX32L HDTV20A User Manual 3.17 Understanding Viewing Features Your HDTV features four viewing modes. You can switch viewing modes using the remote control; please see instructions in page 34. 3.17.1 Viewing Modes Normal Mode The original 4:3 aspect ratio (1.33:1 source) is preserved, so black - Vizio VX32LHDTV10A | User Manual - Page 64
VIZIO remote uses codes 11758 and 10178 to work your LCD HDTV. To use a cable or satellite remote to work the LCD HDTV, refer to your cable or satellite remote user guide for more information on how to program the remote. If your cable or satellite remote uses a 5-digit code (like most Direct TV - Vizio VX32LHDTV10A | User Manual - Page 65
because your digital flat panel TV has video that is many times better than old TV's and so you can see interference and deficiencies you did not know you had. You cannot see a picture. Make sure that the power cord is plugged into a grounded electrical outlet. Make sure that the power button is - Vizio VX32LHDTV10A | User Manual - Page 66
VIZIO VX32L HDTV20A User Manual Problem cover the entire screen. Solution Display (OSD) are set correctly. If you are using TV, AV-C, AV-S or Component with 480i input, follow steps on page 34 on how to set the WIDE screen modes. You can see a picture but you cannot hear sound. Make sure that - Vizio VX32LHDTV10A | User Manual - Page 67
VIZIO VX32L HDTV20A User Manual 4.4 Compliance Caution: Always use a power cable that is properly grounded. Please use the AC cords listed below for each area. USA Canada Germany UK Japan UL CSA VDE BASE/BS Electric Appliance Control Act 4.5 FCC Class B Radio Interference Statement NOTE: This - Vizio VX32LHDTV10A | User Manual - Page 68
VIZIO VX32L HDTV20A User Manual Chapter 5 Miscellaneous Information 5.1 Specifications Specifications Panel 32" Diagonal, 16:9 Aspect Ratio Digital Audio (from digital TV only), 1x Analog Audio Features Noise Reduction, CC, V-Chip, 3D Comb Filter, Motion Adaptive De-Interlace, Picture - Vizio VX32LHDTV10A | User Manual - Page 69
Plug-and-Play TV owners must obtain a CableCARD from their cable company in order to view scrambled programming services. Progressive Scan: A way to scan vertical lines onto a TV picture by scanning all the lines consecutively (progressively). Standard Definition TV (SDTV): Basic digital television - Vizio VX32LHDTV10A | User Manual - Page 70
VIZIO VX32L HDTV20A User Manual 5.3 Index A Accessories, 5 Adjustments Selecting the Screen Size, 34, 63, 69 Stepping through TV Channels, 34 Volume, 9, 34, 65 Advanced Video Features Adaptive Luma, 42 Black Level Extender, 41 CTI (Color Transient Improvement, 42 DNR (Dynamic Noise Reduction, 41 - Vizio VX32LHDTV10A | User Manual - Page 71
VCR, 24 Connecting your Video Camera, 24 T Technical Specifications, 68 Troubleshooting Guide, 65 TV Audio Adjustment, 43 Parental Control, 52 Picture Adjustment, 37 Special Features, 48 TV Audio Adjust VIZIO VX32L HDTV20A User Manual Balance, 44 Bass, 43 Simulated Surround Sound, 44 Speakers On
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
 |
 |
VIZIO VX32L HDTV20A User Manual
Version 5/20/2008
www.VIZIO.com
1
Dear VIZIO Customer,
Congratulations on your new VIZIO VX32L High
Definition LCD Television purchase.
Thank you
for your support.
For maximum benefit of your set,
please read these instructions before making any
adjustments, and retain them for future reference.
We hope you will experience many years of
enjoyment from your new VIZIO VX32L HDTV20A.
For assistance
, please call (949) 428-2525 or e-
mail us at
.
To purchase or inquire about accessories and
installation services for your VIZIO LCD HDTV,
please visit our website at
www.VIZIO.com
or
call toll free at
888-VIZIOCE (888-849-4623).
We recommend you register your VIZIO VX32L
HDTV20A either at our website
www.VIZIO.com
or fill in your registration card and mail it in.
For
peace of mind and to protect your investment
beyond the standard warranty, VIZIO offers on-
site extended warranty service plans.
These
plans
give
additional
coverage
during
the
standard warranty period.
Visit our website or call
us to purchase a plan.
Write down the serial number located on the back
of your VIZIO VX32L HDTV20A.
__ __ __ __ __ __ __ __ __ __ __ __ __ __
Purchase Date _____________________
VIZIO is a registered trademark of V, Inc.
HDMI logo and “High Definition Multimedia Interface” are registered trademarks of HDMI Licensing LLC.
Manufactured under license from Dolby Laboratories
Dolby and the double-D symbol are trademarks of Dolby Laboratories