Vtech CS6449 User Manual - Page 31

Multiple handset use To initiate an intercom call with a cordless handset: 1. Press INT on your handset when not in use. • If you have only one handset, your handset shows Calling base. The telephone base rings and shows HANDSET is calling. Calling base • If you have more than one handset, your handset shows INTERCOM TO: Use the dialing keys to �enter a device number. Your handset shows Calling HANDSET X or Calling base. The destination device rings and shows HANDSET X is calling. HANDSET is calling 2. To answer the intercom call on the destination handset, Intercom press /FLASH, INT, or any dialing key (0-9, TONE or #). Both handsets now show Intercom. -OR- 12:21pm 3/19 To answer the intercom call at the telephone base, press /SPEAKER, INT or any dialing key (0-9, TONE or #) on the telephone base, or lift the corded handset. Both devices now show Intercom. 3. To end the intercom call on either handset, one party presses OFF/CANCEL or INT, or places the handset back in the handset charger. The other party hears four beeps. Both handsets display Intercom ended. -ORTo end the intercom call at the telephone base, press INT or CANCEL when you are using the base speakerphone, or return the corded handset to the telephone base. The other party hears four beeps. Both screens display Intercom ended. • You can cancel the intercom call before it is answered by pressing OFF/CANCEL or INT. • If the destination device does not answer the intercom call within 100 seconds, or if it is accessing the answering system, or is out of range, or is on a call, or is in the directory or call log, your handset displays Unable to call. Try again and then returns to idle mode. • You can press OFF/CANCEL or MUTE/DELETE on the cordless handset, or CANCEL or MUTE on the telephone base to temporarily silence the intercom ringer. • Only one intercom call can be established at a time. 27