Vtech CS6649 CS6649_2 Quick Start Guide

Enter the menu

Press

MENU

.

Press

or

until the screen displays the desired

feature menu.

Press

SELECT

to enter that menu.

To return to the previous menu, press

CANCEL

.

To return to idle mode, press and hold

CANCEL

.

Set date and time

Press

MENU

.

Scroll to

Set date/time

, then press

SELECT

.

Use the dialing keys (

0

-

9

) to enter the month (

MM

),

date (

DD

) and year (

YY

), then press

SELECT

.

Use the dialing keys (

0

-

9

) to enter the hour (

HH

) and

minute (

MM

). Then press

or

to choose

AM

or

PM

.

Press

SELECT

to save.

1.

2.

3.

•

•

1.

2.

3.

4.

5.

IMPORTANT!

Refer to the online Complete user’s manual for a full set of

installation and operation instructions. For manual download or

customer service, visit our website at www.vtechphones.com or

call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com

or call 1 (800) 267-7377.

Copyright © 2012 for VTECH TELECOMMUNICATIONS LTD.

All rights reserved. Printed in China.

96-008624-020-100

Set number of rings

You can set the answering system to answer an incoming

call after 2, 3, 4, 5 or 6 rings; or toll saver. If you choose toll

saver, the answering system answers a call after 2 rings when

you have new messages, or after 4 rings when you have no

new messages.

Press

MENU

.

Scroll to

Answering sys

then press

SELECT

.

Scroll to

Ans sys setup

then press

SELECT

.

Scroll to

# of rings

then press

SELECT

.

Press

or

to choose

6

,

5

,

4

,

3

,

2

or

Toll saver

and

then press

SELECT

.

Record your own announcement

You can use the preset announcement to answer calls,

or replace it with your own recorded announcement. The

announcement can be up to 90 seconds in length.

Press

MENU

.

Scroll to

Answering sys

then press

SELECT

twice.

The system announces, “

To play, press

2

. To record,

press

7

.

” Then press

7

to record.

The system announces, “

Record after the tone. Press

5

when you are done.

” After the tone, speak towards the

microphone.

Press

5

when done.

1.

2.

3.

4.

5.

1.

2.

3.

4.

5.

Quick start guide

CS6648-2/CS6649/

CS6649-2/CS6649-3

Introduction

This quick start guide provides you with the basic installation

and setup instructions. A limited set of features are described

in abbreviated form.

For complete installation and operation instructions, refer to the

Abridged user’s manual provided in the product package, or see

the online Complete user’s manual at www.vtechphones.com.

Telephone base and handset charger installation

Install the telephone base and handset charger as shown below.

Battery installation and charging

Install the battery as shown below. Once you have installed

the battery, you may be able to make and receive short

calls. For best performance, charge the handset battery

continuously for at least

10 hours.

Slide the battery

compartment cover

towards the center of

the handset until it clicks

into place.

3.

Place the handset in

the handset charger

to charge.

4.

CHARGE

light

remains on when

charging.

Plug the battery

connector securely into

the socket.

1.

Place the battery with the

label

THIS SIDE UP

facing

up and the wires inside the

battery compartment.

2.

Use only the power adapters and batteries supplied with

this product.

Telephone base

Handset charger

Telephone

line cord

A DSL filter

(not included)

is required if you

have DSL

high-speed

Internet service.

The DSL

filter must be

plugged into the

telephone wall

jack.

Telephone base

power adapter

Electrical outlet

not controlled by a

wall switch

Charger

adapter

Telephone

wall jack

Vtech CS6649 CS6649_2 Quick Start Guide

Vtech CS6649 Manual

Vtech CS6649 manual content summary: